BS cable standards

BS cable standard code Name
BIP 0007-2004 Telecommunication cabling and equipment installations - A Guide to requirements and responsibilities
BS 1858-2002 Electric cables - Accessories - Bitumen-based filling compounds
BS 196-1961 Specification for protected-type non-reversible plugs, socket-outlets cable-couplers and appliance-couplers with earthing contacts for single phase a.c. circuits up to 250 volts
BS 2316 Pts.1 & 2-1968 Specification for radio-frequency cables. General requirements and tests. British Government Services requirements
BS 2484-1985 Specification for straight concrete and clayware cable covers
BS 2562-1979 Specification for cable boxes for transformers and reactors
BS 2E 21-1957 Pren type electric cables for aircraft
BS 2G 180-1974 Specification for permanent splicing of aircraft electrical cables
BS 2G 215-1-1985 Nickel-chromium and nickel-aluminium thermocouple extension cables for aircraft - Specification for conductors
BS 2G 215-2-1989 Nickel-chromium and nickel-aluminium thermocouple extension cables for aircraft - Specification for terminations
BS 2G 221-1980 Specification for Minyvin type electric cables (metric units)
BS 2G 223-1989 Specification for screen terminating devices for aircraft electric cables
BS 2G 232-1987 Specification for electric cables for general airframe or equipment interconnect use (135 °C), wrapped insulation
BS 2G 238-1996 Specification for electric cables for general airframe or equipment interconnect use (260 °C), nickel plated copper and copper alloy conductors, with wrapped insulation
BS 3454-1995 Specification for 1.9/3.3 kV, 300 A bolted flameproof cable couplers and adaptors (including 380/660 V and 640/1100 V, 300 A adaptors) for use in coal mines
BS 3858-1992 Specification for binding and identification sleeves for use on electric cables and wires
BS 3905-1995 Specification for 3.8/6.6 kV, 300 A bolted flameproof cable couplers and adaptors, for use in coal mines
BS 3988-1970 Specification for wrought aluminium for electrical purposes - Solid conductors for insulated cables
BS 3G 197-1982 Specification for stud-type terminal blocks for terminations on aircraft electric cables
BS 3G 198-2-1997 Sleeves for aircraft electric cables and equipment wires - Specification for slip-on sleeves for identification purposes
BS 3G 198-4-1996 Sleeves for aircraft electric cables and equipment wires - Specification for fluoropolymer heat shrinkable sleeving for binding and insulation
BS 3G 210-1996 Specification for PTFE insulated equipment wires and cables, single- and multi-core, with silver plated copper conductors (190 °C) or nickel plated copper conductors (260 °C)
BS 3G 231-1997 Specification for conductors for general-purpose aircraft electrical cables and aerospace applications
BS 3G 233-1990 Specification for electric cables for general airframe or equipment interconnect use (135 °C), extruded insulation
BS 4553-1-1998 Specification for 600/1000 V single-phase split concentric electric cables - Cables having PVC insulation
BS 4553-2-1998 Specification for 600/1000 V single-phase split concentric electric cables - Cables having thermosetting insulation
BS 4553-3-1998 Specification for 600/1000 V single-phase split concentric electric cables - Cables having thermosetting insulation and low emission of smoke and corrosive gases when affected by fire
BS 4579-2-1973 Specification for performance of mechanical and compression joints in electric cable and wire connectors - Compression joints in nickel, iron and plated copper conductors
BS 4678-1-1971 Cable trunking - Steel surface trunking
BS 4678-2-1973 Cable trunking - Steel underfloor (duct) trunking
BS 4678-4-1982 Cable trunking - Specification for cable trunking made of insulating material
BS 4727 Pt.2 Group 08-1986 Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to power engineering. Electric cable terminology
BS 4727-2 Group 08-1994 Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms - Terms particular to power engineering - Electric cables
BS 4737-3.30-1986 Intruder alarm systems - Specifications for components - Specification for PVC insulated cables for interconnecting wiring
BS 4808-1-1972 Specification for L.F. cables and wires with PVC insulation and PVC sheath for telecommunication - General requirements and tests
BS 4808-2-1972 Specification for L.F. cables and wires with PVC insulation and PVC sheath for telecommunication - Equipment wires with solid or stranded conductors, unscreened, single
BS 4808-3-1972 Specification for L.F. cables and wires with PVC insulation and PVC sheath for telecommunication - Cables and equipment wires, with solid or stranded conductors, screened, single
BS 4808-4-1974 Specification for L.F. cables and wires with PVC insulation and PVC sheath for telecommunication - Equipment wires with solid or stranded conductors, unscreened, in pairs, triples, quads and quintuples
BS 4808-5-1973 Specification for L.F. cables and wires with PVC insulation and PVC sheath for telecommunication - Cables with solid or stranded conductors, screened and sheathed, one pair
BS 4937-30-1993 International thermocouple reference tables - Extension and compensating cables - Tolerances and identification system
BS 4G 178-2-1986 Crimped joints for aircraft electrical cables and wires - Specification for control of crimping (including user control tests)
BS 4G 198-1-1997 Sleeves for aircraft electric cables and equipment wires - Specification for elastomeric sleeves for binding and identification
BS 4G 198-3-1999 Sleeves and moulded components for aircraft electric cables and equipment wires - Specification for heat-shrinkable sleeving for binding, insulation, and identification
BS 5099-2004 Electric cables - Voltage levels for spark testing
BS 5308-1-1986 Instrumentation cables - Specification for polyethylene insulated cables
BS 5308-2-1986 Instrumentation cables - Specification for PVC insulated cables
BS 5372-1997 Specification for dimensions of cable terminations for multi-core extruded solid dielectric insulated distribution cables of rated voltages 600/1000 V and 1900/3300 V having copper or aluminium conductors
BS 542-1973 Specification for cable glands and sealing boxes for association with apparatus for use at mines and quarries
BS 5G 178-1-1993 Crimped joints for aircraft electrical cables and wires - Specification for design requirements (including tests) for components and tools
BS 6004-2000 Electric cables - PVC insulated, non-armoured cables for voltages up to and including 450/750 V, for electric power, lighting and internal wiring
BS 6007-2000 Electric cables - Single core unsheathed heat resisting cables for voltages up to and including 450/750 V, for internal wiring
BS 6007-2006 Electric cables - Single core unsheathed heat resisting cables forvoltages up to and including 450/750 V, for internal wiring
BS 6121-1-2005 Mechanical cable glands - Armour glands - Requirements and test methods
BS 6121-5-2005 Mechanical cable glands - Code of practice for selection, installation and inspection of cable glands and armour glands
BS 6207-3-2001 Mineral insulated cables with a rated voltage not exceeding 750 V. Guide to use
BS 6234-1987 Specification for polyethylene insulation and sheath of electric cables
BS 638-4-1996 Arc welding power sources, equipment and accessories - Specification for welding cables
BS 6387-1994 Specification for performance requirements for cables required to maintain circuit integrity under fire conditions
BS 6435-1984 Specification for unfilled enclosures for the dry termination of HV cables for transformers and reactors
BS 6436-1984 Specification for ground mounted distribution transformers for cable box or unit substation connection
BS 6469-99.1-1992 Insulating and sheathing materials of electric cables - Test methods used in the United Kingdom but not specified in BS EN 60811: Non-electrical tests
BS 6469-99.2-1992 Insulating and sheathing materials of electric cables - Test methods used in the United Kingdom but not specified in BS EN 60811 or other Parts of BS 6469: Electrical tests
BS 6480-1988 Specification for impregnated paper-insulated lead or lead alloy sheathed electric cables of rated voltages up to and including 33000 V
BS 6500-2000 Electric cables - Flexible cords rated up to 300/500 V, for use with appliances and equipment intended for domestic, office and similar environments
BS 6513-1-1984 Wideband cabled distribution systems - Glossary of terms
BS 6513-2-1984 Wideband cabled distribution systems - Methods of measurement
BS 6513-4-1984 Wideband cabled distribution systems - Specification for performance requirements, for upstream television
BS 6513-5-1987 Wideband cabled distribution systems - Recommendations for one-way and interactive data services
BS 6622-1999 Specification for cables with extruded cross-linked polyethylene or ethylene propylene rubber insulation for rated voltages from 3.8/6.6 kV up to 19/33 kV
BS 6701-2004 Telecommunications equipment and telecommunications cabling - Specification for installation, operation and maintenance
BS 6708-1998 Flexible cables for use at mines and quarries
BS 6724-1997 Electric cables - Thermosetting insulated, armoured cables for voltages of 600/1000 V and 1900/3300 V, having low emission of smoke and corrosive gases when affected by fire
BS 6883-1999 Elastomer insulated cables for fixed wiring in ships and on mobile and fixed offshore units - Requirements and test methods
BS 6904-1987 Guide for cable connections for gas-insulated metal-enclosed switchgear for rated voltages of 72.5 kV and above
BS 6910-1-1988 Cold pour resin compound and heat-shrink cable joints in the voltage range up to 1000 V a.c. and 1500 V d.c. Specification for materials
BS 6910-2-1989 Cold pour resin compound and heat-shrink cable joints in the voltage range up to 1000 V a.c. and 1500 V d.c. Code of practice for on-site installation
BS 6913-6-1991 Operation and maintenance of earth-moving machinery - Specification for identification and marking of electrical wires and cables
BS 6946-1988 Specification for metal channel cable support systems for electrical installations
BS 7019-1989 Specification for fully screened 400 A bolted flameproof cable couplers and adaptors for use on systems up to and including 6.6 kV, primarily for use in mines
BS 7197-1990 Specification for performance of bonds for electric power cable terminations and joints for system voltages up to 36 kV
BS 7211-1998 Electric cables - Thermosetting insulated, non-armoured cables for voltages up to and including 450/750 V, for electric power, lighting and internal wiring, and having low emission of smoke and corrosive gases when affected by fire
BS 7215-1990 Specification for separable insulated cable connector systems above 1 kV and up to 36 kV
BS 7346-6-2005 Components for smoke and heat control systems - Specifications for cable systems
BS 7383-1990 Specification for cold-pour resin-based compound for use as a filling medium in terminating cables in enclosures for voltages not exceeding 11 kV for use in coal mines
BS 7450-1991 Method for determination of economic optimization of power cable size
BS 7540-2-2005 Electric cables - Guide to use for cables with a rated voltage not exceeding 450/750 V. Harmonized cable types from HD 21 and HD 22
BS 7540-3-2005 Electric cables - Guide to use for cables with a rated voltage not exceeding 450/750 V. National standard cables not included in HD 21 and HD 22
BS 7609-1992 Code of practice for installation and inspection of uninsulated compression and mechanical connectors for power cables with copper or aluminium conductors
BS 7629-1-1997 Specification for 300/500 V fire resistant electric cables having low emission of smoke and corrosive gases when affected by fire - Multicore cables
BS 7629-2-1997 Specification for 300/500 V fire resistant electric cables having low emission of smoke and corrosive gases when affected by fire - Multipair cables
BS 7655-1.2-1997 Specification for insulating and sheathing materials for cables - Part 1. Cross-linked elastomeric insulating compounds - Section 1.2 General 90 °C application
BS 7655-1.3-2000 Specification for insulating and sheathing materials for cables - Elastomeric insulating compounds - XLPE - Sec1.3 XLPE
BS 7655-1.4-2000 Specification for insulating and sheathing materials for cables - Elastomeric insulating compounds - Oil resisting types - Oil resisting types
BS 7655-1.5-2000 Specification for insulating and sheathing materials for cables - Part 1: Cross-linked elastomeric insulating compounds - Section 1.5: Flame retardant composites
BS 7655-10.1-2000 Specification for insulating and sheathing materials for cables - Part 10: Polyethylene sheathing compounds - Section 10.1: Thermoplastic medium density polyethylene (MDPE) sheathing compound
BS 7655-2.3-2000 Specification for insulating and sheathing materials for cables - Elastomeric sheathing compounds - General application - General application
BS 7655-2.4-2000 Specification for insulating and sheathing materials for cables - Part 2: Cross-linked elastomeric sheathing compounds - Section 2.4: Welding cable covering
BS 7655-2.6-2000 Specification for insulating and sheathing materials for cables - Part 2: Cross-linked elastomeric sheathing compounds - Section 2.6: Sheathing compounds for ships' wiring and offshore applications
BS 7655-3.2-2000 Specification for insulating and sheathing materials for cables - PVC insulating compounds - Hard grade types - Hard grade types
BS 7655-4.2-2000 Specification for insulating and sheathing materials for cables - PVC sheathing compounds - General application - General application
BS 7727-1994 Code of practice for installation and inspection of pre-insulated compression terminals and connectors for cables with copper conductors up to 6 mm2
BS 7769-1.1-1997 Electric cables - Calculation of the current rating - Current rating equations (100% load factor) and calculation of losses - General
BS 7769-1.2-1994 Electric cables - Calculation of the current rating - Current rating equations (100% load factor) and calculation of losses - Sheath eddy current loss factors for two circuits in flat formation
BS 7769-2-2.1-1997 Electric cables - Calculation of the current rating - Thermal resistance - Calculation of thermal resistance - Section 2.1: Calculation of thermal resistance
BS 7769-2.1-1997 Electric cables - Calculation of the current rating - Thermal resistance - Calculation of thermal resistance
BS 7769-2.2-1997 Electric cables - Calculation of the current rating - Thermal resistance - A method for calculating reduction factors for groups of cables in free air, protected from solar radiation
BS 7769-3.1-1997 Electric cables - Calculation of the current rating - Sections on operating conditions - Reference operating conditions and selection of cable type
BS 7816-3-1998 Determination of long-term radiation ageing in polymers - Procedures for in-service monitoring of low-voltage cable materials
BS 7821-2.1-1995 Three phase oil-immersed distribution transformers, 50 Hz, from 50 to 2500 kVA with highest voltage for equipment not exceeding 36 kV - Distribution transformers with cable boxes on the high voltage and/or low voltage side - General requirements
BS 7821-2.2-1998 Three phase oil-immersed distribution transformers, 50 Hz, from 50 to 2500 kVA with highest voltage for equipment not exceeding 36 kV - Distribution transformers with cable boxes on the high voltage and/or low voltage side - Cable boxes of type 1 for use on distribution transformers meeting the requirements of BS 7821-2.1
BS 7821-2.3-1998 Three phase oil-immersed distribution transformers, 50 Hz, from 50 to 2500 kVA with highest voltage for equipment not exceeding 36 kV - Distribution transformers with cable boxes on the high voltage and/or low voltage side - Cable boxes type 2 for use on distribution transformers meeting the requirements of BS 7821-2.1
BS 7835-2000 Specification for armoured cables with extruded cross-linked polyethylene or ethylene propylene rubber insulation for rated voltages from 3.8/6.6 kV up to 19/33 kV having low emission of smoke and corrosive gases when affected by fire
BS 7846-2000 Electric cables - 600/1000 V armoured fire-resistant cables having thermosetting insulation and low emission of smoke and corrosive gases when affected by fire
BS 7861-2-1997 Strata reinforcement support system components used in coal mines - Specification for birdcaged cablebolting
BS 787-1-1969 Specification for mining type flameproof gate-end boxes - Gate-end boxes for direct-on-line motor starting (for use on 3-phase a.c. circuits up to 650 V)
BS 787-2-1968 Specification for mining type flameproof gate-end boxes - Gate-end boxes with air-break circuit-breakers (for use on 3-phase a.c. circuits up to 650 volts)
BS 787-3-1971 Specification for mining type flameproof gate-end boxes - Gate-end boxes with lighting transformers
BS 787-4-1972 Specification for mining type flameproof gate-end boxes - Gate-end boxes for drilling machines (for use on 3-phase a.c. circuits up to 650 V)
BS 7870-1-1996 LV and MV polymeric insulated cables for use by distribution and generation utilities - General
BS 7870-2-1999 LV and MV polymeric insulated cables for use by distribution and generation utilities - Methods of test
BS 7870-3.10-2001 LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables of rated voltage 0.6/1 kV - PVC insulated combined neutral and earth copper wire concentric cables with copper or aluminium conductors
BS 7870-3.11-2001 LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables of rated voltage 0.6/1 kV - XLPE insulated combined neutral and earth copper wire concentric cables with copper or aluminium conductors
BS 7870-3.12-2001 LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables of rated voltage 0.6/1 kV - XLPE insulated combined neutral and earth copper wire concentric cables with copper or aluminium conductors, having low emission of smoke and corrosive gases when affected by fire
BS 7870-3.20-2001 LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables of rated voltage 0.6/1 kV - PVC insulated split concentric cables with copper or aluminium conductors
BS 7870-3.21-2001 LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables of rated voltage 0.6/1 kV - XLPE insulated split concentric cables with copper or aluminium conductors
BS 7870-3.40-2001 LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables of rated voltage 0.6/1 kV - XLPE insulated, copper wire waveform concentric cables with solid aluminium conductors
BS 7870-3.50-2005 LV and MV polymeric insulated cables for use by distribution and generation utilities - Part 3: Specification for distribution cables of rated voltage 0.6/1 kV - Section 3050: XLPE insulated, copper wire waveform or helical concentric cables with solid aluminium conductors, having low emission of smoke and corrosive gases when affected by fire (Implementation of HD 603)
BS 7870-4.10-1999 LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables with extruded insulation for rated voltages of 11 kV and 33 kV - Single-core 11 kV and 33 kV cables - Single core 11 kV and 33 kV cables
BS 7870-4.11-1999 LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables with extruded insulation for rated voltages of 11 kV and 33 kV - Single-core 33 kV lead sheathed cables - Single core 33 kV lead sheathed cables
BS 7870-4.20-1999 LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables with extruded insulation for rated voltages of 11 kV and 33 kV - Three-core 11 kV cables - Three core 11 kV cables
BS 7870-5-1999 LV and MV polymeric insulated cables for use by distribution and generation utilities - Polymeric insulated aerial bundled conductors (ABC) of rated voltage 0.6/1 kV for overhead distribution
BS 7870-6.1-1999 LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for 0.6/1 kV and 1.9/3.3 kV power cables with special fire performance for use in power stations - PVC insulated and PVC sheathed cables
BS 7870-6.2-1999 LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for 0.6/1 kV and 1.9/3.3 kV power cables with special fire performance for use in power stations - XLPE or HEPR insulated and PVC sheathed cables
BS 7870-6.3-1999 LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for 0.6/1 kV and 1.9/3.3 kV power cables with special fire performance for use in power stations - Cables with thermosetting insulation and non-halogenated sheath
BS 7870-7.1-2003 LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for power cables having rated voltages of 3.8/6.6 kV and 6.35/11 kV with special fire performance for use in power stations - Single core and 3-core cables with halogenated materials and with aluminium or steel wire armouring
BS 7870-7.2-2003 LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for power cables having rated voltages of 3.8/6.6 kV and 6.35/11 kV with special fire performance for use in power stations - Single-core and 3-core cables with halogen-free materials and with aluminium or steel wire armouring
BS 7870-8.1-2003 LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for multicore and multipair cables for installation above and below ground - Single wire armoured and PVC sheathed multicore cable with copper conductors - Section 8.1 Single wire armoured and PVC sheathed multicore cable with copper conductors
BS 7870-8.2-2003 LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for multicore and multipair cables for installation above and below ground - Single wire armoured and PVC sheathed multipair cable with copper conductors - Section 8.2 Single wire armoured and PVC sheathed multipair cable with copper conductors
BS 7870-8.3-2003 LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for multicore and multipair cables for installation above and below ground - Single wire armoured and PVC sheathed multicore cable with copper conductors, having reduced fire propagation performance - Section 8.3 Single wire armoured and PVC sheathed multicore cable with copper conductors, having reduced fire propagation performance
BS 7870-8.4-2003 LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for multicore and multipair cables for installation above and below ground - Single wire or double steel tape armoured and PVC sheathed multipair cable with copper conductors, having reduced fire propagation performance - Section 8.4 Single wire or double steel tape armoured and PVC sheathed multipair cable with copper conductors, having reduced fire propagation performance
BS 7870-8.5-2003 LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for multicore and multipair cables for installation above and below ground - Single wire armoured and unarmoured multicore cables with copper conductors and non-halogenated sheath - Section 8.5 Single wire armoured and unarmoured multicore cables with copper conductors and non-halogenated sheath
BS 7870-8.6-2003 LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for multicore and multipair cables for installation above and below ground - Single wire or double steel tape armoured and non-halogenated sheathed multipair cable with copper conductors - Section 8.6 Single wire or double steel tape armoured and non-halogenated sheathed multipair cable with copper conductors
BS 7888-4.1-2006 Test requirements on accessories for use on power cables of rated voltage from 3,6/6(7,2)kV up to 20,8/36(42)kV - Part 1: Cables with extruded insulation
BS 7888-4.2-2006 Test requirements on accessories for use on power cables of rated voltage from 3,6/6(7,2) kV up to 20,8/36(42)kV - Part 2: Cables with impregnated paper insulation
BS 7889-1997 Electric cables - Thermosetting insulated, unarmoured cables for a voltage of 600/1000 V
BS 7894-2003 MV impregnated paper insulated distribution cables of rated voltages of 3.8/6.6 kV to 19/33 kV
BS 7912-2001 Power cables with XLPE insulation and metallic sheath, and their accessories, for rated voltages from 66 kV (Um=72.5 kV) to 132kV (Um=145kV) - Requirements and test methods
BS 7917-1999 Elastomer insulated fire resistant (limited circuit integrity) cables for fixed wiring in ships and on mobile and fixed offshore units - Requirements and test methods
BS 7919-2001 Electric cables - Flexible cables rated up to 450/750V, for use with appliances and equipment intended for industrial and similar environments
BS 7922-2004 Electric cables - Fluid-filled, paper- and PPL-insulated, metal-sheathed cables and accessories for alternating voltages up to and including 400 kV (Um = 420 kV) - Requirements and test methods
BS 7923-2004 Electric cables - Internal gas-pressure cables and accessories for alternating voltages up to and including 275 kV (Um = 300 kV) - Requirements and test methods
BS 7933-1-1998 Electric cables - Accessories - Material characterization - Resinous compounds before cure and in the cured state
BS 7970-2005 Electric cables - Metallic wire and foil sheath constructions of power cables having XLPE insulation for rated voltages from 66kV (Um = 72.5 kV) to 132kV (Um = 145 kV)
BS 8434-2-2003 Methods of test for assessment of the fire integrity of electric cables - Test for unprotected small cables for use in emergency circuits - BS EN 50200 with 930 deg flame and with water spray
BS 8436-2004 Electric cables - 300/500 V screened electric cables having low emission of smoke and corrosive gases when affected by fire, for use in walls, partitions and building voids - Multicore cables
BS 91-1998 Electric cable soldering sockets - Specification
BS AU 16a-1989 Specification for electrical cable connectors (17.5 A maximum continuous rating)
BS AU 255-1-1994 Road vehicle unscreened low tension cables - Specification for conductor sizes and dimensions for thick walled insulated cables
BS AU 255-2-1994 Road vehicle unscreened low tension cables - Specification for conductor sizes and dimensions for thin walled insulated cables
BS AU 267-1998 Code of practice for breakaway cables and secondary couplings
BS AU 7a-1983 Specification for colour code for road vehicle electrical cables
BS AU 88a-1985 Recommendations for ratings for light duty cables for automobile use
BS AU 91-1965 Specification for dimensions of electrical cable connectors for starter battery taper terminal posts (cars and light commercial vehicles using positive earth system)
BS DD CLC/TS 50429-2005 Optical fibre cables - Sewer cables - Family specification for cables to be installed in storm and sanitary sewers
BS DD CLC/TS 50430-2005 Optical fibre cables - Gas pipe cables - Family specifications for cables to be installed in high pressure gas pipes
BS DD CLC/TS 50431-2005 Optical fibre cables - Drinking water pipe cables - Family specification for cables to be installed in drinking water pipes
BS DD ENV 13149-2-2000 Public transport - Road vehicle scheduling and control systems - WORLDFIP cabling specifications
BS DD IEC/PAS 62338-2003 Screened balanced cables - Coupling attenuation measurement, triaxial method
BS DD ISO/TS 16553-2006 Road vehicles - Data cables - Test methods and requirements
BS EN 10257-1-1998 Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Land cables
BS EN 10257-2-1998 Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Submarine cables
BS EN 12548-1999 Lead and alloys - Lead alloy ingots for electric cable sheathing and for sleeves
BS EN 12613-2001 Plastic warning devices for underground cables and pipelines with visual characteristics
BS EN 13149-5-2004 Public transport - Road vehicle scheduling and control systems - CANopen cabling specifications
BS EN 13920-3-2003 Aluminium and aluminium alloys - Scrap - Wire and cable scrap
BS EN 175500-1997 Harmonized system of quality assessment for electronic components - Sectional specification:cable outlet accessories for connectors, including qualification approval and capability approval
BS EN 186150-1997 Connector sets for optical fibres and cables - Type OCCA-BU
BS EN 186160-1997 Connector sets for optical fibres and cables - Type OCCA-PC
BS EN 186170-1998 Harmonized system of quality assessment for electronic components - Sectional specification:connector sets for optical fibres and cables - Type RCC
BS EN 186260-1998 Harmonized system of quality assessment for electronic components - Sectional specification: connector sets for optical fibres and cables - Type SC
BS EN 186270-1998 Harmonized system of quality assessment for electronic components - Sectional specification: connector sets for optical fibres and cables - Type LSH
BS EN 186290-1998 Harmonized system of quality assessment for electronic components - Connector sets for optical fibres and cables - Type MPO
BS EN 186300-1999 Harmonized system of quality assessment for electronic components - Sectional specification: connector sets for optical fibres and cables type MSC
BS EN 186310-1999 Harmonized system of quality assessment for electronic components - Sectional specification: connector sets for optical fibres and cables - Type MF
BS EN 187105-2002 Single mode optical cable (duct/direct buried installation)
BS EN 2083-2001 Aerospace series - Copper and copper alloy conductors for electrical cables - Product standard
BS EN 2084-2005 Cables, electric, single-core, general purpose, with conductors in copper or copper alloy — Technical specification
BS EN 2266-003-2005 Cables, electrical, for general purpose — Operating temperatures between -55 °C and 200 °C — Part 003: Ink jet printable — Product standard
BS EN 2266-005-2005 Cables, electrical, for general purpose — Operating temperatures between??-55 ℃ and 200 ℃ — Part 005: UV laser printable — Product standard
BS EN 2266-007-2005 Cables, electrical, for general purpose — Operating temperatures between –55 ℃ and 200 ℃ — Part 007: UV laser printable multicore jacketed cable — Product standard
BS EN 2267-002-2005 Cables, electrical, for general purpose — Operating temperatures between -55 °C and 260 °C — Part 002: General
BS EN 2267-003-2005 Cables, electrical, for general purpose — Operating temperatures between -55 °C and 260 °C— Part 003: Inkjet printable — Product standard
BS EN 2267-007-2005 Cables, electrical, for general purpose — Operating temperatures between -55 °C and 260 °C — Part 007: DMA family, single ink-jet printable and multicore assembly — Product standard
BS EN 2267-008-2005 Cables, electrical, for general purpose — Operating temperatures between -55 °C and 260 °C — Part 008: DM family, single UV laser printable and multicore assembly — Product standard
BS EN 2267-009-2005 Cables, electrical, for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 009: DRA family, single and multicore assembly — Product standard
BS EN 2267-010-2005 Cables, electrical, for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 010: DR family, single UV laser printable — Product standard
BS EN 2591-609-2005 Elements of electrical and optical connection — Test methods — Part 609: Optical elements — Effectiveness of cable attachment — Cable cyclic flexing
BS EN 2591-610-2001 Elements of electrical and optical connection - Test methods - Optical elements - Effectiveness of cable attachment - Cable pulling
BS EN 2591-611-2001 Elements of electrical and optical connection - Test methods - Optical elements - Effectiveness of cable attachment - Cable torsion
BS EN 2591-612-2001 Elements of electrical and optical connection - Test methods - Optical elements - Effectiveness of cable attachment - Cable axial compression
BS EN 2713-003-2005 Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 200 °C - Screened (spiral) and jacketed, ink jet printable - Product standard
BS EN 2713-007-2005 Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 200 °C - Screened (spiral) and jacketed, UV laser printable - Product standard
BS EN 2714-002-2005 Cables, electrical, single and multicore for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 002: Screened and jacketed — General
BS EN 2714-003-2005 Cables, electrical, single and multicore for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 003: Screened (spiral) and jacketed, ink jet printable — Product standard
BS EN 2714-007-2005 Cables, electrical, single and multicore for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 007: Screened (spiral) and jacketed, UV laser printable — Product standard
BS EN 2714-011-2005 Cables, electrical, single and multicore for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 011: DM family, screened (spiral) and jacketed, UV laser printable — Product standard
BS EN 2714-012-2005 Cables, electrical, single and multicore for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 012: DM family, screened (braided) and jacketed, UV laser printable — Product standard
BS EN 2714-013-2005 Cables, electrical, single and multicore for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 013: DR family, screened (spiral) and jacketed, UV laser printable — Product standard
BS EN 2853-2005 Current ratings for electrical cables with conductor EN 2083
BS EN 3475-100-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - General
BS EN 3475-201-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Visual examination
BS EN 3475-202-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Mass
BS EN 3475-301-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Ohmic resistance per unit length
BS EN 3475-303-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Insulation resistance
BS EN 3475-304-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Surface resistance
BS EN 3475-305-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Overload resistance
BS EN 3475-306-2005 Cables, electrical, aircraft use — Test methods — Part 306: Continuity of conductors
BS EN 3475-307-2005 Cables, electrical, aircraft use — Test methods — Part 307: Corona extinction voltage
BS EN 3475-401-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Accelerated ageing
BS EN 3475-402-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Shrinkage and delamination
BS EN 3475-403-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Delamination and blocking
BS EN 3475-404-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Thermal shock
BS EN 3475-405-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Bending at ambient temperature
BS EN 3475-406-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Cold bend test
BS EN 3475-407-2005 Cables, electrical, aircraft use — Test methods — Part 407: Flammability
BS EN 3475-408-2005 Cables, electrical, aircraft use — Test methods — Part 408: Fire resistance
BS EN 3475-409-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Air-excluded ageing
BS EN 3475-410-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Thermal endurance
BS EN 3475-411-2005 Cables, electrical, aircraft use — Test methods — Part 411: Resistance to fluids
BS EN 3475-412-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Humidity resistance
BS EN 3475-413-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Wrap back test
BS EN 3475-414-2005 Cables, electrical, aircraft use — Test methods — Part 414: Differential scanning calorimeter (DSC test)
BS EN 3475-415-2005 Cables, electrical, aircraft use — Test methods — Part 415: Rapid change of temperature
BS EN 3475-416-2005 Cables, electrical, aircraft use — Test methods — Part 416: Thermal stability
BS EN 3475-501-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Dynamic cut-through
BS EN 3475-502-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Notch propagation
BS EN 3475-503-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Scrape abrasion
BS EN 3475-504-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Torsion
BS EN 3475-505-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Tensile tests on conductors and strands
BS EN 3475-506-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Plating continuity
BS EN 3475-507-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Adherence of plating
BS EN 3475-508-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Plating thickness
BS EN 3475-509-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Solderability
BS EN 3475-510-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Tensile strength and elongation of extruded insulation, sheath and jacket material
BS EN 3475-511-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Cable-to-cable abrasion
BS EN 3475-512-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Flexure endurance
BS EN 3475-513-2005 Cables, electrical, aircraft use — Test methods — Part 513: Deformation resistance (Installation with plastic cable ties)
BS EN 3475-603-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Resistance to wet arc tracking
BS EN 3475-604-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Resistance to dry arc propagation
BS EN 3475-605-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Wet short circuit test
BS EN 3475-701-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Strippability and adherence of insulation to the conductor
BS EN 3475-702-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Screen pushback capability
BS EN 3475-703-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Permanence of manufacturer's marking
BS EN 3475-704-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Flexibility
BS EN 3475-705-2005 Cables, electrical, aircraft use — Test methods — Part 705: Contrast measurement
BS EN 3475-706-2005 Cables, electrical, aircraft use — Test methods — Part 706: Laser markability
BS EN 3475-801-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Capacitance per unit length
BS EN 3475-802-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Capacitance unbalance
BS EN 3475-803-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Capacitance variation
BS EN 3475-804-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Velocity of propagation
BS EN 3475-805-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Characteristic impedance
BS EN 3475-806-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Attenuation
BS EN 3475-807-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Transfer impedance
BS EN 3475-808-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Cross-talk
BS EN 3719-2005 Aluminium or aluminium alloy conductors for electrical cables — Product standard
BS EN 3745-511-2002 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Cable to cable abrasion
BS EN 4049-002-2005 Thermocouple extension cable — Operating temperatures between -65 °C and 260 °C — Part 002: General
BS EN 4057-201-2005 Cable ties for harnesses — Test methods — Part 201: Visual examination
BS EN 4057-202-2005 Cable ties for harnesses — Test methods — Part 202: Examination of mass and dimensions
BS EN 4057-301-2005 Cable ties for harnesses — Test methods — Part 301: Salt mist test
BS EN 4057-303-2005 Cable ties for harnesses — Test methods — Part 303: Resistance to fluids
BS EN 4057-305-2005 Cable ties for harnesses -- Test methods -- Part 305: Coulor fastness??
BS EN 4057-405-2005 Cable ties for harnesses — Test methods — Part 405: Compass safe distance
BS EN 4057-407-2005 Cable ties for harnesses — Test methods — Part 407: Verification of application tool settings
BS EN 4165-013-2005 Connectors, electrical, rectangular, modular — Operating temperature 175 ℃ continuous??— Part 013: Cable clamp 2 and 4 modules for connectors, series 2 and series 3 — Product standard
BS EN 4434-2005 Copper or copper alloy lightweight conductors for electrical cables — Product standard (Normal and tight tolerances)
BS EN 45510-2-8-2004 Guide for procurement of power station equipment - Electrical equipment - Power cables
BS EN 50083-10-2002 Cabled distribution systems for television and sound signals - System performance for return paths
BS EN 50083-3-2002 Cabled distribution systems for television and sound signals - Active wideband equipment for coaxial cable networks
BS EN 50083-4-1999 Cabled distribution systems for television and sound signals - Passive wideband equipment for coaxial cable networks
BS EN 50083-5-2002 Cabled distribution systems for television and sound signals - Headend equipment
BS EN 50083-7-1997 Cabled distribution systems for television and sound signals - System performance
BS EN 50083-8-2002 Cabled distribution systems for television and sound signals - Electromagnetic compatibility for networks
BS EN 50083-9-2003 Cabled distribution systems for television and sound signals - Interfaces for CATV/SMATV headends and similar professional equipment for DVB/MPEG-2 transport streams
BS EN 50085-2-3-2001 Cable trunking and cable ducting systems for electrical installations - Particular requirements for slotted cable trunking systems intended for installation in cabinets - Section 3: Slotted in cabinets
BS EN 50090-9-1-2005 Home and building electronic systems (HBES) - Installation requirements - Generic cabling for HBES class 1 twisted pair
BS EN 50098-1-1999 Customer premises cabling for information technology - ISDN basic access
BS EN 50098-2-1996 Customer premises cabling for information technology - 2048 kbit/s ISDN primary access and leased line network interface
BS EN 50109-1-1996 Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - General requirements and tests
BS EN 50109-2-1-1996 Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Particular requirements - Radio frequency connectors and concentric contacts - Open throat tools with fixed dies, sizes A to E, V and W
BS EN 50109-2-2-1996 Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Particular requirements - Radio frequency connectors and concentric contacts - Open throat tools with removable and interchangeable dies, sizes A to G, Q to T, V and W
BS EN 50109-2-3-1996 Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Particular requirements - Contacts of electrical connectors
BS EN 50109-2-4-1996 Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Particular requirements - Centre contacts of RF connectors, series SMZ
BS EN 50109-2-5-1996 Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Particular requirements - Termination of twin-ax cable for databus applications
BS EN 50117-1-2002 Coaxial cables - Part 1: Generic specification
BS EN 50117-2-1-2005 Coaxial cables - Part 2-1: Sectional specification for cables used in cabled distribution networks - Indoor drop cables for systems operating at 5 MHz - 1000 MHz
BS EN 50117-2-2-2004 Coaxial cables - Part 2-2: Sectional specification for cables used in cabled distribution networks - Outdoor drop cables for systems operating at 5 MHz - 1000 MHz
BS EN 50117-2-3-2004 Coaxial cables - Part 2-3: Sectional specification for cables used in cabled distribution networks - Distribution and trunk cables for systems operating at 5 MHz - 1000 MHz
BS EN 50117-2-4-2004 Coaxial cables - Sectional specification for cables used in cabled distribution networks - Indoor drop cables for systems operating at 5 MHz - 3000 MHz
BS EN 50117-2-5-2004 Coaxial cables - Sectional specification for cables used in cabled distribution networks - Outdoor drop cables for systems operating at 5 MHz - 3000 MHz
BS EN 50117-3-1-2002 Coaxial cables - Sectional specifications for cables used in telecom applications - Miniaturized cables used in digital communication systems
BS EN 50117-3-1996 Coaxial cables used in cabled distribution networks - Part 3: Sectional specification for outdoor drop cables
BS EN 50117-4-1996 Coaxial cables used in cabled distribution networks - Part 4: Sectional specification for distribution and trunk cables
BS EN 50117-5-1997 Coaxial cables used in cabled distribution networks - Sectional specification for indoor drop cables for use in networks operating at frequencies between 5 MHz and 2150 MHz
BS EN 50117-6-1997 Coaxial cables used in cabled distribution networks - Sectional specification for outdoor drop cables for use in networks operating at frequencies between 5 MHz and 2150 MHz
BS EN 50143-1999 Cables for signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV
BS EN 50146-2000 Cable ties for electrical installations
BS EN 50173-1-2003 Information technology - Generic cabling systems - General requirements and office areas
BS EN 50174-1-2001 Information technology - Cabling installation - Specification and quality assurance
BS EN 50174-2-2001 Information technology - Cabling installation - Installation planning and practices inside buildings
BS EN 50174-3-2004 Installation technology - Cabling installation - Installation planning and practices outside buildings
BS EN 50200-2006 Method of test for resistance to fire of unprotected small cables for use in emergency circuits
BS EN 50214-1998 Flexible cables for lifts
BS EN 50249-2003 Electromagnetic locators for buried pipes and cables - Performance and safety
BS EN 50262-1999 Cable glands for electrical installations
BS EN 50264-1-2002 Railway applications - Railway rolling stock cables having special fire performance - Standard wall - General requirements
BS EN 50264-2-2002 Railway applications - Railway rolling stock cables having special fire performance - Standard wall - Single core cables
BS EN 50264-3-2002 Railway applications - Railway rolling stock cables having special fire performance - Standard wall - Multicore cables
BS EN 50266-1-2001 Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Apparatus
BS EN 50266-2-1-2001 Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Procedures - Category A F/R
BS EN 50266-2-2-2001 Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Procedures - Category A
BS EN 50266-2-3-2001 Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Procedures - Category B
BS EN 50266-2-4-2001 Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Procedures - Category C
BS EN 50266-2-5-2001 Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Procedures - Small cables - Category D
BS EN 50267-1-1999 Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Apparatus
BS EN 50267-2-1-1999 Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Procedures - Determination of the amount of halogen acid gas - Determination of the amount of halogen acid gas
BS EN 50267-2-2-1999 Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Procedures - Determination of degree of acidity of gases for materials by measuring pH and conductivity - Determination of degree of acidity of gases for materials by measuring pH and conductivity
BS EN 50267-2-3-1999 Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Procedures - Determination of degree of acidity of gases for cables by determination of the weighted average of pH and conductivity - Determination of degree of acidity of gases for cables by determination of the weighted average of pH and conductivity
BS EN 50288-1-2004 Multi-element metallic cables used in analogue and digital communication and control - Generic specification
BS EN 50288-2-1-2004 Multi-element metallic cables used in analogue and digital communication and control - Horizontal and building backbone cables - Horizontal and building backbone cables
BS EN 50288-2-2-2004 Multi-element metallic cables used in analogue and digital communication and control - Sectional specification for screened cables characterized up to 100 MHz - Work area and patch cord cables
BS EN 50288-3-1-2004 Multi-element metallic cables used in analogue and digital communication and control - Sectional specification for unscreened cables characterized up to 100 MHz - Horizontal and building backbone cables
BS EN 50288-3-2-2004 Multi-element metallic cables used in analogue and digital communication and control - Sectional specification for unscreened cables - Work area and patch cord cables
BS EN 50288-4-1-2004 Multi-element metallic cables used in analogue and digital communication and control - Sectional specification for screened cables characterized up to 600 MHz - Horizontal and building backbone cables
BS EN 50288-4-2-2004 Multi-element metallic cables used in analogue and digital communication and control - Sectional specification for screened cables characterized up to 600 MHz - Work area and patch cord cables
BS EN 50288-5-1-2004 Multi-element metallic cables used in analogue and digital communication and control - Sectional specification for screened cables characterized up to 250 MHz - Horizontal and building backbone cables
BS EN 50288-5-2-2004 Multi-element metallic cables used in analogue and digital communication and control - Sectional specification for screened cables characterized up to 250 MHz - Work area and patch cord cables
BS EN 50288-6-1-2004 Multi-element metallic cables used in analogue and digital communication and control - Sectional specification for unscreened cables characterised up to 250 MHz - Horizontal and building backbone cables
BS EN 50288-6-2-2004 Multi-element metallic cables used in analogue and digital communication and control - Sectional specification for unscreened cables characterised up to 250 MHz - Work area and patch cord cables
BS EN 50289-1-1-2001 Communication cables - Specifications for test methods - Electrical test methods - General requirements - General requirements
BS EN 50289-1-10-2002 Communication cables - Specifications for test methods - Electrical test methods - Crosstalk
BS EN 50289-1-11-2002 Communication cables - Specifications for test methods - Electrical test methods - Characteristic impedance, input impedance, return loss
BS EN 50289-1-12-2005 Communication cables - Specifications for test methods - Electrical test methods - Inductance
BS EN 50289-1-13-2004 Communication cables - Specifications for test methods - Electrical test methods - Coupling attenuation or screening attenuation of patch cords/coaxial cable assemblies/pre-connectorised cables
BS EN 50289-1-14-2004 Communication cables - Specifications for test methods - Electrical test methods - Coupling attenuation or screening attenuation of connecting hardware
BS EN 50289-1-15-2004 Communication cables - Specifications for test methods - Electromagnetic performance - Coupling attenuation of links and channels (laboratory conditions)
BS EN 50289-1-2-2001 Communication cables - Specifications for test methods - Electrical test methods - DC resistance - d.c.resistance
BS EN 50289-1-3-2001 Communication cables - Specifications for test methods - Electrical test methods - Dielectric strength - Dielectric strength
BS EN 50289-1-4-2001 Communication cables - Specifications for test methods - Electrical test methods - Insulation resistance
BS EN 50289-1-5-2001 Communication cables - Specifications for test methods - Electrical test methods - Capacitance - SEC5 : Capacitance
BS EN 50289-1-6-2002 Communication cables - Specifications for test methods - Electrical test methods - Electromagnetic performance
BS EN 50289-1-7-2001 Communication cables - Specifications for test methods - Electrical test methods - Velocity of propagation - sec7 : Velocity of propagation
BS EN 50289-1-8-2001 Communication cables - Specifications for test methods - Electrical test methods - Attentuation - Sec8 : attentuation
BS EN 50289-1-9-2002 Communication cables - Specifications for test methods - Electrical test methods - Unbalance attenuation (longitudinal conversion loss, longitudinal conversion transfer loss)
BS EN 50289-3-1-2001 Communication cables - Specifications for test methods - Mechanical test methods - General requirements - General requirements
BS EN 50289-3-10-2005 Communication cables - Specifications for tests methods - Mechanical test methods - Torsion and twisting
BS EN 50289-3-11-2001 Communication cables - Specifications for test methods - Mechanical test methods - Cable cut-through resistance
BS EN 50289-3-12-2001 Communication cables - Specifications for test methods - Mechanical test methods - Shot gun damage
BS EN 50289-3-13-2003 Communication cables - Specifications for test methods - Mechanical test methods - Aeolian vibration
BS EN 50289-3-15-2003 Communication cables - Specifications for test methods - Mechanical test methods - Underwater cable resistance to hydrostatic pressure
BS EN 50289-3-16-2001 Communication cables - Specifications for test methods - Mechanical test methods - Cable tensile performance
BS EN 50289-3-17-2002 Communication cables - Specifications for test methods - Mechanical test methods - Adhesion of dielectric and sheath
BS EN 50289-3-2-2001 Communication cables - Specifications for test methods - Mechanical test methods - Tensile strength and elongation for conductor
BS EN 50289-3-4-2001 Communication cables - Specifications for test methods - Mechanical test methods - Tensile strength, elongation and shrinkage of insulation and sheath
BS EN 50289-3-5-2001 Communication cables - Specifications for test methods - Mechanical test methods - Crush resistance of the cable
BS EN 50289-3-6-2001 Communication cables - Specifications for test methods - Mechanical test methods - Impact resistance of the cable
BS EN 50289-3-7-2001 Communication cables - Specifications for test methods - Mechanical test methods - Abrasion resistance of the cable sheath
BS EN 50289-3-8-2001 Communication cables - Specifications for test methods - Mechanical test methods - Abrasion resistance of cable sheath markings
BS EN 50289-3-9-2001 Communication cables - Specifications for test methods - Mechanical test methods - Bending tests
BS EN 50289-4-1-2001 Communication cables - Specifications for test methods - Environmental test methods - General requirements
BS EN 50289-4-11-2002 Communication cables - Specifications for test methods - Environmental test methods - A horizontal integrated fire test method
BS EN 50289-4-12-2004 Communication cables - Specifications for test methods - Environmental test methods - Vertical flame spread test on bunched small communication cables
BS EN 50289-4-14-2003 Communication cables - Specifications for test methods - Environmental test methods - Lightning
BS EN 50289-4-2-2001 Communication cables - Specifications for test methods - Environmental test methods - Water penetration
BS EN 50289-4-6-2001 Communication cables - Specifications for test methods - Environmental test methods - Temperature cycling
BS EN 50289-4-9-2001 Communication cables - Specifications for test methods - Environmental test methods - Pneumatic resistance
BS EN 50290-1-1-2001 Communication cables - General
BS EN 50290-1-2-2004 Communication cables - Definitions
BS EN 50290-2-1-2005 Communication cables - Common design rules and construction
BS EN 50290-2-20-2001 Communication cables - Common design rules and construction - General
BS EN 50290-2-21-2002 Communication cables - Part 2-21: Common design rules and construction - PVC insulation compounds
BS EN 50290-2-22-2002 Communication cables - Part 2-22: Common design rules and construction - PVC sheathing compounds
BS EN 50290-2-23-2002 Communication cables - Part 2-23: Common design rules and construction - PE insulation
BS EN 50290-2-24-2002 Communication cables - Common design rules and construction - PE sheathing
BS EN 50290-2-25-2002 Communication cables - Common design rules and construction - Polypropylene insulation compounds
BS EN 50290-2-26-2002 Communication cables - Common design rules and construction - Halogen free flame retardant insulation compounds
BS EN 50290-2-27-2002 Communication cables - Common design rules and construction - Halogen free flame retardant thermoplastic sheathing compounds
BS EN 50290-2-28-2002 Communication cables - Common design rules and construction - Filling compounds for filled cables
BS EN 50290-2-29-2002 Communication cables - Common design rules and construction - Cross-linked PE insulation compounds
BS EN 50290-2-30-2002 Communication cables - Common design rules and construction - Poly(tetrafluoroethylene-hexafluoropropylene) (FEP) insulation and sheathing
BS EN 50290-4-1-2002 Communication cables - General considerations for the use of cables - Environmental conditions and safety aspects
BS EN 50299-2002 Oil-immersed cable connection assemblies for transformers and reactors having highest voltage for equipment Um from 72,5 kV to 550 kV
BS EN 50300-2004 Low-voltage switchgear and controlgear assemblies - General requirements for low-voltage substation cable distribution boards
BS EN 50306-1-2002 Railway applications - Railway rolling stock cables having special fire performance - Thin wall - General requirements
BS EN 50306-2-2002 Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Single core cables
BS EN 50306-3-2002 Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Single core and multicore cables (pairs, triples and quads) screened and thin wall sheathed
BS EN 50306-4-2002 Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Multicore and multipair cables standard wall sheathed
BS EN 50307-2003 Lead and lead alloys - Lead and lead alloy sheaths and sleeves of electric cables
BS EN 50334-2001 Marking by inscription for the identification of cores of electric cables
BS EN 50336-2002 Bushings for transformers and reactor cable boxes not exceeding 36 kV
BS EN 50340-2002 Hydraulic cable cutting devices - Devices to be used on electrical installations with nominal voltage up to AC 30 kV
BS EN 50343-2003 Railway applications - Rolling stock - Rules for installation of cabling
BS EN 50346-2003 Information technology - Cabling installation - Testing of installed cabling
BS EN 50355-2003 Railway applications - Railway rolling stock cables having special fire performance - Thin wall and standard wall - Guide to use
BS EN 50356-2002 Method for spark testing of cables
BS EN 50362-2003 Method of test for resistance to fire of larger unprotected power and control cables for use in emergency circuits
BS EN 50363-0-2005 Insulating, sheathing and covering materials for low voltage energy cables - General introduction
BS EN 50363-1-2005 Insulating, sheathing and covering materials for low voltage energy cables — Part 1: Cross-linked elastomeric insulating compounds
BS EN 50363-2-1-2005 Insulating, sheathing and covering materials for low voltage energy cables — Part 2-1: Cross-linked elastomeric sheathing compounds
BS EN 50363-2-2-2005 Insulating, sheathing and covering materials for low voltage energy cables — Part 2-2: Cross-linked elastomeric covering compounds
BS EN 50363-3-2005 Insulating, sheathing and covering materials for low voltage energy cables - Part 3: PVC insulating compounds
BS EN 50363-4-1-2005 Insulating, sheathing and covering materials for low voltage energy cables — Part 4-1: PVC sheathing compounds
BS EN 50363-4-2-2005 Insulating, sheathing and covering materials for low voltage energy cables — Part 4-2: PVC covering compounds
BS EN 50368-2003 Cable cleats for electrical installations
BS EN 50369-2005 Liquid tight sheathing systems for cable management
BS EN 50406-1-2004 End user multi-pair cables used in high bit rate telecommunication networks - Aerial cables
BS EN 50406-2-2004 End user multi-pair cables used in high bit rate telecommunication networks - Duct and buried cables
BS EN 50407-1-2004 Multi-pair cables used in high bit rate digital access telecommunication networks - Outdoor cables
BS EN 50414-2006 Test methods for analysis of lead in PVC taken from insulation and sheath of electric and optical fibre cables - Method A: Total lead content determination with flame excitation atomic absorption spectrometry - Method B: Qualitative analysis of lead by lead sulphide staining
BS EN 60169-24-1994 Radio-frequency connectors - Radio-frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable distribution systems (Type F)
BS EN 60169-25-1994 Radio-frequency connectors - Two-pole screw (3/4-20 UNEF) coupled connectors for use with shielded balanced cables having twin inner conductors with inner diameter of outer conductor 13,56 mm (0,534 in) (Type TWHN)
BS EN 60228-2005 Conductors of insulated cables
BS EN 60230-2002 Impulse tests on cables and their accessories
BS EN 60332-1-1-2005 Tests on electrical and optical cables under fire conditions - Test for a vertical flame propagation for a single insulated wire or cable - Apparatus
BS EN 60332-1-2-2004 Tests on electric and optical fibre cables under fire conditions - Test for vertfical flame propagation for a single insulated wire or cable - Procedure for 1 kW pre-mixed flame
BS EN 60332-1-3-2004 Tests on electric and optical fibre cables under fire conditions - Test for vertical flame propagation for a single vertical insulated wire or cable - Procedure for determination of flaming droplets/particles
BS EN 60332-2-1-2005 Tests on electric and optical fibre cables under fire conditions - Test for vertical flame propagation for a single small insulated wire or cable - Apparatus
BS EN 60332-2-2-2004 Tests on electric and optical fibre cables under fire conditions - Tests for vertical flame propagation for a single small insulated wire or cable - Procedure for diffusion flame
BS EN 60371-3-8-1996 Specification for insulating materials based on mica - Specifications for individual materials - Mica paper tapes for flame-resistant security cables
BS EN 60439-5-1996 Specification for low-voltage switchgear and controlgear assemblies - Particular requirements for assemblies intended to be installed outdoors in public places - Cable distribution cabinets (CDCs) for power distribution in networks
BS EN 60465-1992 Specification for unused insulating mineral oils for cables with oil ducts
BS EN 60526-2005 High-voltage cable plug and socket connections for medical X-ray equipment
BS EN 60603-9-1998 Connectors for frequencies below 3 MHz for use with printed boards - Two-part connectors for printed boards, backpanels and cable connectors, basic grid of 2,54 mm (0,1 in)
BS EN 60702-1-2002 Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V. Cables
BS EN 60702-2-2002 Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V. Terminations
BS EN 60719-1993 Calculation for the lower and upper limits for the average outer dimensions of cables with circular copper conductors and of rated voltages up to and including 450/750 V
BS EN 60728-6-2003 Cable networks for television signals, sound signals and interactive services - Optical equipment
BS EN 60728-7-1-2005 Cable networks for television signals, sound signals and interactive services - Hybrid fibre coax outside plant status monitoring - Physical (PHY) layer specification
BS EN 60728-7-2-2005 Cable networks for television signals, sound signals and interactive services - Hybrid fibre coax outside plant status monitoring - Media access control (MAC) layer specification
BS EN 60728-7-3-2005 Cable networks for television signals, sound signals and interactive services - Hybrid fibre coax outside plant status monitoring - Power supply to transponder interface bus (PSTIB) - Specification
BS EN 60794-1-1-2002 Optical fibre cables - Generic specification - General
BS EN 60794-1-2-2003 Optical fibre cables - Generic specification - Basic optical cable test procedures
BS EN 60794-2-11-2005 Optical fibre cables — Part 2-11: Indoor cables — Detailed specification for simplex and duplex cables for use in premises cabling
BS EN 60794-2-21-2006 Optical fibre cables - Part 2-21: Indoor cables - Detailed specification for multi-fibre optical distribution Cables for use in premises cabling
BS EN 60794-2-31-2006 Optical fibre cables - Part 2-31: Indoor cables - Detailed specification for optical fibre ribbon cables for use in premises cabling
BS EN 60794-3-10-2002 Optical fibre cables - Outdoor cables - Family specification for duct and directly buried optical telecommunication cables
BS EN 60794-3-20-2003 Optical fibre cables - Outdoor cables - Family specification for optical self-supporting aerial telecommunication cables
BS EN 60794-3-2002 Optical fibre cables - Sectional specification - Outdoor cables
BS EN 60811-1-1-1995 Insulating and sheathing materials of electric cables - Common test methods - General application - Measurement of thickness and overall dimensions - Tests for determining the mechanical properties - Section 1: Measurement of thickness and overall dimensions - Tests for determining the mechanical properties
BS EN 60811-1-2-1995 Insulating and sheathing materials of electric cables - Common test methods - General application - Thermal ageing methods
BS EN 60811-1-3-1995 Insulating and sheathing materials of electric cables - Common test methods - General application - Methods for determining the density - Water absorption tests - Shrinkage test - Section 3: Methods for determining the density - Water absorption tests - Shrinking test
BS EN 60811-1-4-1995 Insulating and sheathing materials of electric cables - Common test methods - General application - Tests at low temperature
BS EN 60811-2-1-1998 Insulating and sheathing materials of electric cables - Common test methods - Methods specific to elastomeric compounds - Methods specific to elastomeric compounds - Ozone resistance, hot set and mineral oil immersion tests
BS EN 60811-3-1-1995 Insulating and sheathing materials of electric cables - Common test methods - Methods specific to PVC compounds - Pressure test at high temperature - Tests for resistance to cracking
BS EN 60811-3-2-1995 Insulating and sheathing materials of electric cables - Common test methods - Methods specific to PVC compounds - Loss of mass test - Thermal stability test
BS EN 60811-4-1-2004 Insulating and sheathing materials of electric and optical cables - Common test methods - Methods specific to polypropylene and polypropylene compounds - Resistance to environmental stress cracking - Measurement of the melt flow index - Carbon black and/or mineral filter content measurement in PE by direct combustion - Measurement of carbon black content by TGA - Assessment of carbon black dispersion in polyethylene using a microscope
BS EN 60811-4-2-2004 Insulating and sheathing materials of electric and optical cables - Common test methods - Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at break after conditioning at elevated temperature - Wrapping test after conditioning at elevated temperature - Wrapping test after thermal ageing in air - Measurement of mass increase - Long-term stability test - Test method for copper-catalyzed oxidative degradation
BS EN 60811-5-1-2000 Insulating and sheathing materials of electric and optical fibre cables - Common test methods - Methods specific to filling compounds - Drop point - Separation of oil - Lower temperature brittleness - Total acid number - Absence of corrosive components - Permittivity at 23 °C - D.C. resistivity at 23 °C and 100 °C
BS EN 60874-17-1997 Connectors for optical fibres and cables - Sectional specification for fibre optic connector - Type F-05 (friction lock)
BS EN 60885-2-2003 Electrical test methods for electric cables - Partial discharge tests
BS EN 60885-3-2003 Electrical test methods for electric cables - Test methods for partial discharge measurements on lengths of extruded power cables
BS EN 60966-1-1999 Radio frequency and coaxial cable assemblies - Generic specification - General requirements and test methods
BS EN 60966-2-1-2003 Radio frequency and coaxial cable assemblies - Sectional specification for flexible coaxial cable assemblies
BS EN 60966-2-2-2003 Radio frequency and coaxial cable assemblies - Blank detail specification for flexible coaxial cable assemblies
BS EN 60966-2-3-2003 Radio frequency and coaxial cable assemblies - Detail specification for flexible coaxial cable assemblies
BS EN 60966-2-4-2003 Radio frequency and coaxial cable assemblies - Detail specification for cable assemblies for radio and TV receivers Frequency range 0 to 3000 MHz, IEC 61169-2 connectors
BS EN 60966-2-5-2003 Radio frequency and coaxial cable assemblies - Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 to 1000 MHz, IEC 61169-2 connectors
BS EN 60966-2-6-2003 Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 to 3000 MHz, IEC 61169-24 connectors
BS EN 60966-3-1-2003 Radio frequency and coaxial cable assemblies - Blank detail specification for semi-flexible coaxial cable assemblies
BS EN 60966-3-2-2003 Radio frequency and coaxial cable assemblies - Detail specification for semi-flexible coaxial cable assemblies for GSM use (0,8 GHz - 1 GHz)
BS EN 60966-3-2003 Radio frequency and coaxial cable assemblies - Sectional specification for semi-flexible coaxial cable assemblies
BS EN 60966-4-1-2003 Radio frequency and coaxial cable assemblies - Blank detail specification for semi-rigid coaxial cable assemblies
BS EN 60966-4-2003 Radio frequency and coaxial cable assemblies - Sectional specification for semi-rigid coaxial cable assemblies
BS EN 61034-2-2005 Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements
BS EN 61076-3-103-2004 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Rectangular connectors - Detail specification for single row connectors with non-removable ribbon cable contacts on 1,25 mm pitch used for high speed serial data (HSSDC)
BS EN 61076-4-103-1999 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Printed board connectors - Detail specification for two-part connectors with shielding and a basic grid of 2,5 mm - Cable to board connectors, shielded against EMC ,grid 2,5 mm,for high speed data rates,for use with printed boards
BS EN 61076-4-108-2003 Connectors for electronic equipment - Printed board connectors with assessed quality - Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density of 15 mm, having a basic grid of 2,5 mm in accordance with IEC 60917-1
BS EN 61076-4-110-2002 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Printed board connectors - Detail specification for latched cable connector system having a basic grid of 2,0 mm including full shielding and latching function
BS EN 61076-7-001-2004 Connectors for electronic equipment - Cable outlet accessories - Blank detail specification
BS EN 61138-1998 Cables for portable earthing and short-circuiting equipment
BS EN 61169-24-2002 Radio-frequency connectors - Sectional specification - Radio frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable distribution systems (type F)
BS EN 61196-2-2003 Radio-frequency cables - Specifications - Sectional specification for semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene (PTFE) insulation
BS EN 61196-3-1999 Radio-frequency cables - Specifications - Sectional specification for coaxial cables for local area networks
BS EN 61196-3-2-1998 Radio-frequency cables - Specifications - Coaxial cables for digital communication in horizontal floor wiring - Detail specification for coaxial cables with solid dielectric for local area networks of 185 m reach and up to 10 Mb/s
BS EN 61196-3-3-1998 Radio-frequency cables - Specifications - Coaxial cables for digital communication in horizontal floor wiring - Detail specification for coaxial cables with foamed dielectric for local area networks of 185 m reach and up to 10 Mb/s
BS EN 61196-4-2004 Coaxial communication cables - Sectional specification for radiating cables
BS EN 61238-1-2003 Compression and mechanical connectors for power cables for rated voltages up to 36 kV (Um = 42 kV) - Test methods and requirements
BS EN 61242-1998 Electrical accessories - Cable reels for household and similar purposes
BS EN 61280-1-1-1998 Optical fibre amplifiers.Basic spectrum analyzers - Transmitter output optical power measurement for single-mode optical fibre cable
BS EN 61280-4-2-2000 Fibre optic communication subsystem basic test procedures - Fibre optic cable plant - Single-mode fibre optic cable plant attenuation
BS EN 61300-2-35-1997 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Cable nutation
BS EN 61300-2-37-1997 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Cable bending for closures
BS EN 61300-2-4-1997 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Fibre/cable retention
BS EN 61313-1-1997 Fibre optic passive components and cable assemblies - Capability approval - Generic specification
BS EN 61316-2000 Industrial cable reels
BS EN 61386-1-2004 Conduit systems for cable management - General requirements
BS EN 61386-21-2004 Conduit systems for cable management - Particular requirements - Rigid conduit systems
BS EN 61386-22-2004 Conduit systems for cable management - Particular requirements - Pliable conduit systems
BS EN 61386-23-2004 Conduit systems for cable management - Particular requirements - Flexible conduit systems
BS EN 61442-2005 Test methods for accessories for power cables with rated voltages from 6 kV (Um = 7,2 kV) up to 36 kV (Um = 42 kV)
BS EN 61515-1996 Mineral insulated thermocouple cables and thermocouples
BS EN 61537-2002 Cable tray systems and cable ladder systems for cable management
BS EN 61726-2000 Cable assemblies, cables, connectors and passive microwave components - Screening attenuation measurement by the reverberation chamber method
BS EN 61935-1-2005 Testing of balanced communication cabling in accordance with standards series EN 50173 — Part 1: Installed cabling
BS EN 61935-2-2005 Testing of balanced communication cabling in accordance with standards series EN 50173 — Part 2: Patch cords and work area cords
BS EN 62012-1-2002 Multicore and symmetrical pair/quad cables for digital communications to be used in harsh environments - Generic specification
BS EN 62037-2000 RF connectors, connector cable assemblies and cables - Intermodulation level measurement
BS EN 62153-1-1-2004 Metallic communication cables test methods - Electrical - Measurement of the pulse/step return loss in the frequency domain using the inverse discrete fourier transformation(IDFT)
BS EN 62153-4-2-2004 Metallic communication cable test methods - Electromagnetic compatibility - Screening and coupling attenuation - Injection clamp method
BS EN ISO 10807-1997 Pipework - Corrugated flexible metallic hose assemblies for the protection of electrical cables in explosive atmosphere
BS EN ISO 5828-2001 Resistance welding equipment - Secondary connecting cables with terminals connected to water-cooled lugs - Dimensions and characteristics
BS EN ISO 6551-1983 Petroleum liquids and gases - Fidelity and security of dynamic measurement - Cabled transmission of electric and/or electronic pulsed data
BS EN ISO 8205-1-2002 Water-cooled secondary connection cables for resistance welding - Dimensions and requirements for double-conductor connection cables
BS EN ISO 8205-2-2002 Water-cooled secondary connection cables for resistance welding - Dimensions and requirements for single-conductor connection cables
BS EN ISO 8205-3-1997 Water-cooled secondary connection cables for resistance welding - Test requirements
BS G 177-1961 Specification for Nyvin type electrical cables for aircraft
BS G 184 to G 188-1964 Specification for aluminium terminal ends and in-line connectors for hexagonal crimping to aircraft aluminium electrical cables
BS G 189-1964 Specification for Tersil type electrical cables for aircraft
BS G 192-1965 Specification for Efglas type electric cables with copper conductors for aircraft
BS G 195-1966 Specification for Minyvin type electric cables for aircraft
BS G 198-5-1997 Sleeves for aircraft electric cables and equipment wires - Specification for heat shrinkable moulded shapes
BS G 212-1971 Specification for general requirements for aircraft electrical cables
BS G 222-1976 Specification for Efglas type electric cables (metric units)
BS G 227-1979 Specification for Tersil type electric cables (metric units)
BS G 235-1987 Specification for electric cables for general airframe or equipment interconnect use (150 °C), wrapped insulation with silver plated conductors
BS G 236-1987 Specification for electric cables for general airframe or equipment interconnect use (200 °C), wrapped insulation with nickel plated conductors
BS G 237-1987 Specification for electric cables for general airframe or equipment interconnect use (200 °C), extruded insulation with nickel plated conductors
BS G 241-1988 Specification for fire proof electric cables for engine fire zone and airframe use
BS G 243-1990 Specification for igniter cables for engine use (4 kV d.c.)
BS G 246-1991 Specification for cable ties for installation under controlled tension on aircraft electric cable harnesses
BS G 250-1994 Specification for identification marking of electric cables
BS G 258-1995 Glossary of terms for electrical cables and cable harnesses
BS IEC 60287-1-3-2003 Electric cables - Calculation of the current rating - Current rating equations (100 % load factor) and calculation of losses - Current sharing between parallel single-core cables and calculation of circulating current losses
BS IEC 60313-2002 Coaxial connectors used in nuclear laboratory instrumentation
BS IEC 60853-3-2002 Calculation of the cyclic and emergency current rating of cables - Cyclic rating factor for cables of all voltages, with partial drying of the soil
BS IEC 60874-14-1-1998 Connectors for optical fibres and cables - Detail specification for fibre optic connector type SC-PC standard terminated to multimode fibre type A1a, A1b
BS IEC 61000-5-2-1998 Electromagnetic compatibility (EMC) - Installation and mitigation guidelines - Earthing and cabling
BS ISO 13990-3-2006 Textile machinery and accessories - Yarn feeders and yarn control for knitting machines - Dimensions for connecting and interconnection cables
BS ISO 3808-2003 Road vehicles - Unscreened high-voltage ignition cables - General specifications, test methods and requirements
BS ISO 4141-1-2006 Road vehicles - Multi-core connecting cables - Test methods and requirements for basic performance sheathed cables
BS ISO 6856-2005 Road vehicles - Unscreened high-voltage ignition cable assemblies - Test methods and general requirements
BS ISO/IEC 11458-1994 Information technology. Microprocessor systems. VICbus. Inter-crate cable bus
BS ISO/IEC 14709-1-1997 Information technology - Configuration of customer premises cabling (CPC) for applications - ISDN basic access
BS QC 221300-1997 Radio-frequency connectors - RF coaxial connectors with inner diameter of outer conductor 3 mm (0,12 in) with snap-on coupling - Characteristic impedance 50 ohms (Type SMB)
DD ENV 13149-2-2000 Public transport. Road vehicle scheduling and control systems. WORLDFIP cabling specifications
DD IEC PAS 62255-1-2001 Multi-pair cables used in high bit rate digital access telecommunication networks. Outdoor Cables
FD Z 86-154-1997 DIGITAL VIDEO BROADCASTING (DVB). IMPLEMENTATION GUIDELINES FOR THE USE OF MPEG-2 SYSTEMS. VIDEO AND AUDIO IN SATELLITE AND CABLE BROADCASTING APPLICATIONS.
KIT 79-2001 Information technology - Cabling systems pack
PD 6580-2-1995 Home and building electronic systems.Technical report 1. Guidelines for the professional installation of Twisted Pair cables class 1
Contact Us

Add the link of current page.

Clear

Submit

Instant Messaging

WhatsApp :

+852 6230 0392

Skype :

Caledonian Cables

live:1cb87739a29fb08c

Wechat :
The personal information you enter is only used to reply to your message, It will not be leaked or used for other purposes.