IEC cable standards

Cable standard code Name
IEC 60050-461 AMD 1-1993 International electrotechnical vocabulary; chapter 461: electric cables; amendment 1
IEC 60050-461 AMD 2-1999 International Electrotechnical Vocabulary - Chapter 461: Electric cables; Amendment 2
IEC 60050-461-1984 International Electrotechnical Vocabulary. Part 461 : Chapter 461: Electric cables
IEC 60055-1 AMD 1-2005 Amendment 1 - Paper-insulated metal-sheathed cables for rated voltages up to 18/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables) - Part 1: Tests on cables and their accessories
IEC 60055-1 Edition 5.1-2005 Paper-insulated metal-sheathed cables for rated voltages up to 18/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables) - Part 1: Tests on cables and their accessories
IEC 60055-1-1997 Paper-insulated metal-sheathed cabled for rated voltages up to 18/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables) - Part 1: Tests on cables and their accessories
IEC 60055-2 AMD 1-1989 Paper-insulated metal-sheathed cables for rated voltages up to 18/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables); part 2: general and construction requirements; amendment No. 1 to IEC 60055-2:1981
IEC 60055-2 AMD 2-2005 Amendment 2 - Paper-insulated metal-sheathed cables for rated voltages up to 18/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables) - Part 2: General and construction requirements
IEC 60055-2-1981 Paper-insulated metal-sheathed cabled for rated voltages up to 18/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables); Part 2: General and construction requirements
IEC 60092-350-2001 Electrical installations in ships - Part 350: Shipboard power cables - General construction and test requirements
IEC 60092-351-2004 Electrical installations in ships - Part 351: Insulating materials for shipboard and offshore units, power, control, instrumentation, telecommunication and data cables
IEC 60092-352-2005 Electrical installations in ships - Part 352: Choice and installation of electrical cables
IEC 60092-353 AMD 1-2001 Electrical installations in ships - Part 353: Single and multicore non-radial field power cables with extruded solid insulation for rated voltages 1 kV and 3 kV; Amendment 1
IEC 60092-353-1995 Electrical installations in ships - Part 353: Single and multicore non-radial field power cables with extruded solid insulation for rated voltages 1 kV and 3 kV
IEC 60092-354-2003 Electrical installations in ships - Part 354: Single- and three-core power cables with extruded solid insulation for rated voltages 6 kV (U<(Index)m> = 7,2 kV) up to 30 kV (U<(Index)m> = 36 kV)
IEC 60092-359 AMD 1 Corrigendum 1-1995 Electrical installations in ships - Part 359: Sheathing materials for shipboard power and telecommunication cables; Amendment 1
IEC 60092-359 AMD 1-1994 Electrical installations in ships - Part 359: Sheathing materials for shipboard power and telecommunication cables; Amendment 1
IEC 60092-359 AMD 2-1999 Electrical installations in ships - Part 359: Sheathing materials for shipboard power and telecommunication cables; Amendment 2
IEC 60092-359 Edition 1.2-1999 Electrical installations in ships - Part 359: Sheathing materials for shipboard power and telecommunication cables
IEC 60092-359-1987 Electrical installations in ships. Part 359 : Sheathing materials for shipboard power and telecommunication cables
IEC 60092-373-1977 Electrical installations in ships. Part 373 : Shipboard telecommunication cables and radio-frequency cables. Shipboard coaxial cables
IEC 60092-374-1977 Electrical installations in ships. Part 374 : Shipboard telecommunication cables and radio-frequency cables. Telephone cables for non-essential communication cables
IEC 60092-375-1977 Electrical installations in ships. Part 375 : Shipboard telecommunication cables and readio-frequency cables. General instrumentation, control and communication cables
IEC 60092-376-2003 Electrical installations in ships - Part 376: Cables for control and instrumentation circuits 150/250 V (300 V)
IEC 60096-0-1 AMD 1-2000 Radio-frequency cables - Part 0: Guide to the design of detailed specifications; Section One: Coaxial cables; Amendment 1
IEC 60096-0-1 Edition 2.1-2000 Radio frequency cables - Part 0: Guide to the design of detail specifications; Section 1: Coaxial cables
IEC 60096-0-1-1990 Radio-frequency cables; part 0: guide to the design of detail specifications; section 1: coaxial cables
IEC 60096-1 AMD 2-1993 Radio-frequency cables; Part 1: general requirements and measuring methods; amendment 2
IEC 60096-1-1986 Radio-frequency cables. Part 1 : General requirements and measuring methods
IEC 60096-2 AMD 1-1990 Radio-frequency cables; part 2: relevant cable specifications; amendment No. 1 to IEC 60096-2:1961
IEC 60096-2 Corrigendum 1-1993 Radio-frequency cables; part 2: relevant cable specifications
IEC 60096-2 Corrigendum 2-1997 Radio-frequency cables; part 2: relevant cable specifications
IEC 60096-2-1988 Radio-frequency cables; part 2: relevant cable specifications
IEC 60096-3-1982 Radio-frequency cables. Part 3 : General requirements and tests for single-unit coaxial cables for use in cabled distribution systems
IEC 60096-4-1-1990 Radio-frequency cables; part 4: specification for superscreened cables; section 1: general requirements and test methods
IEC 60141-1 AMD 1-1995 Tests on oil-filled and gas-pressure cables and their accessories - Part 1: Oil-filled, paper-insulated, metal-sheathed cables and accessories for alternating voltages up to and including 400 kV; Amendment 1
IEC 60141-1 AMD 2-1998 Tests on oil-filled and gas-pressure cables and their accessories - Part 1: Oil-filled, paper-insulated, metal-sheathed cables and accessories for alternating voltages up to and including 400 kV; Amendment 2
IEC 60141-1-1993 Tests on oil-filled and gas-pressure cables and their accessories - Part 1: Oil-filled, paper-insulated, metal-sheathed cables and accessories for alternating voltages up to and including 400 kV
IEC 60141-2 AMD 1-1967 Test on oil-filled and gas-pressure cables and their accessories. Part 2 : Internal gas-pressure cables and accessories for alternating voltages up to 275 kV
IEC 60141-2-1963 Test on oil-filled and gas-pressure cables and their accessories. Part 2 : Internal gas-pressure cables and accessories for alternating voltages up to 275 kV
IEC 60141-3 AMD 1-1967 Test on oil-filled and gas-pressure cables and their accessories. Part 3 : External gas-pressure (gas compression) cables and accessories alternating voltage up to 275 kV
IEC 60141-3-1963 Test on oil-filled and gas-pressure cables and their accessories. Part 3 : External gas-pressure (gas compression) cables and accessories alternating voltage up to 275 kV
IEC 60141-4 AMD 1-1990 Test on oil-filled and gas-pressure cables and their accessories; part 4: oil-impregnated paper-insulated high pressure oil-filled pipe-type cables and accessories for alternating voltages up to and including 400 kV; amendment 1 to IEC 60141-4:1980
IEC 60141-4-1980 Test on oil-filled and gas-pressure cables and their accessories. Part 4 : Oil-impregnated paper-insulated high pressure oil-filled pipe-type cables and accessories for alternating voltages up to and including 400 kV
IEC 60169-10 AMD 1-1986 Radio-frequency connectors. Part 10 : R.F. coaxial connectors with inner diameter of outer conductor 3 mm (0.12 in) with snap-on coupling - Characteristic impedance 50 Ohms (Type SBM)
IEC 60169-10 AMD 2-1996 Radio frequency connectors - Part 10: RF coaxial connectors with inner diameter of outer conductor 3 mm (0,12 in) with snap-on coupling - Characteristic impedance 50 ohms (type SMB); Amendment 2
IEC 60169-10-1983 Radio-frequency connectors. Part 10 : R.F. coaxial connectors with inner diameter of outer conductor 3 mm (0.12 in) with snap-on coupling - Characteristic impedance 50 Ohms (Type SBM)
IEC 60169-22-1985 Radio-frequency connectors. Part 22 : R.F. two-pole bayonet coupled connectors for use with shielded balanced cables having twin inner conductors (Type BNO)
IEC 60169-23-1991 Radio-frequency connectors, part 23: pin and socket connector for use with 3,5 mm rigid precision coaxial lines with inner diameter of outer conductor 3,5 mm (0,1378 in)
IEC 60169-24 Corrigendum 1-1995 Radio-frequency connectors; part 24: radio-frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable distribution systems (type F)
IEC 60169-24-1991 Radio-frequency connectors; part 24: radio-frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable distribution systems (type F)
IEC 60169-25-1992 Radio-frequency connectors; part 25: two-pole screw (3/4-20 UNEF) coupled connectors for use with shielded balanced cables having twin inner conductors with inner diameter of outer conductor 13,56 mm (0,534 in) (type TWHN)
IEC 60169-27-1994 Radio-frequency connectors; part 27: radio-frequency coaxial connectors with screw coupling, typically for use in 75 ohms cable distribution systems (type E)
IEC 60169-5 Corrigendum 1-1971 Radio-frequency connectors. Part 5 : R.F. coaxial connectors for cables 96 IEC 60050-17 and larger
IEC 60169-5-1970 Radio-frequency connectors. Part 5 : R.F. coaxial connectors for cables 96 IEC 60050-17 and larger
IEC 60169-6-1971 Radio-frequency connectors. Part 6 : R.F. coaxial connectors for cables 96 IEC 60075-17 and larger
IEC 60173-1964 Colours of the cores of flexible cables and cords
IEC 60183 AMD 1-1990 Guide to the selection of high-voltage cables; amendment 1 to IEC 60183:1984
IEC 60183-1984 Guide to the selection of high-voltage cables
IEC 60189-1 AMD 3-1992 Low-frequency cables and wires with PVC insulation and PVC sheath; part 1: general test and measuring methods; amendment 3
IEC 60189-1-1986 Low-frequency cables and wires with p.v.c. insulation and p.v.c. sheath. Part 1 : General test and measuring methods
IEC 60189-2 AMD 1-1989 Low-frequency cables and wires with PVC insulation and PVC sheath; part 2: cables in pairs, triples, quads and quintuples for inside installations; amendment No. 1 to IEC 60189-2:1981
IEC 60189-2 AMD 2-1996 Low-frequency cables and wires with p.v.c. insulation and p.v.c. sheath - Part 2: Cables in pairs, triples, quads and quintuples for inside installations; Amendment 2
IEC 60189-2-1981 Low-frequency cables and wires with p.v.c. insulation and p.v.c. sheath. Part 2 : Cables in pairs, triples, quads and quintuples for inside installations
IEC 60189-3 AMD 1-1989 Low-frequency cables and wires with PVC insulation and PVC sheath; part 3: equipment wires with solid or stranded conductor, PVC insulated, in singles, pairs and triples; amendment No. 1 to publication 60189-3:1988
IEC 60189-3-1988 Low-frequency cables and wires with P.V.C. insulation and P.V.C. sheath. Part 3: Equipment wires with solid or stranded conductor, PVC insulated, in singles, pairs and triples
IEC 60189-4 AMD 1-1989 Low-frequency cables and wires with PVC insulation and PVC sheath; part 4: distribution wires with solid conductors, PVC insulated, in pairs, triples, quads and quintuples; amendment No. 1 to publication 60189-4:1980
IEC 60189-4-1980 Low-frequency cables and wires with p.v.c. insulation and p.v.c. sheath. Part 4 : Distribution wires with solid conductors, p.v.c. insulated, in pairs, triples, quads and quintuples
IEC 60189-5 AMD 2-1992 Low-frequency cables and wires with PVC insulation and PVC sheath; part 5: equipment wires and cables with solid or stranded conductors, PVC insulated, screened, single or one pair; amendment 2
IEC 60189-5-1980 Low-frequency cables and wires with p.v.c. insulation and p.v.c. sheath. Part 5 : Equipment wires and cables with solid or stranded conductors, p.v.c. insulated, screened, single or one pair
IEC 60189-6 AMD 1-1989 Low-frequency cables and wires with PVC insulation and PVC sheath; part 6: signalling cables in singles for telecommunication equipment and installation; amendment 1 to IEC 60189-6:1982
IEC 60189-6-1982 Low-frequency cables and wires with p.v.c. insulation and p.v.c. sheath. Part 6 : Signalling cables in singles for telecommunication equipment and installation
IEC 60189-7 AMD 1-1989 Low-frequency cables and wires with PVC insulation and PVC sheath; part 7: distribution wires with solid conductors, PVC insulated, polyamide coated, in singles, pairs, triples, quads and quintuples; amendment No. 1 to publication 60189-7:1982
IEC 60189-7-1982 Low-frequency cables and wires with p.v.c. insulation and p.v.c. sheath. Part 7 : Distribution wires with solid conductors, p.v.c. insulated, polyamide coated, in singles, pairs, triples, quads or quintuples
IEC 60227-1 AMD 1-1995 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements; Amendment 1
IEC 60227-1 AMD 2-1998 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements; Amendment 2
IEC 60227-1 Edition 2.2-1998 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements
IEC 60227-1-1993 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V; part 1: general requirements
IEC 60227-2 AMD 1-2003 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 2: Test methods; Amendment 1
IEC 60227-2 Corrigendum 1-1998 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 2: Test methods
IEC 60227-2 Edition 2.1-2003 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 2: Test methods
IEC 60227-2-1997 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 2: Test methods
IEC 60227-3 AMD 1-1997 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 3: Non-sheathed cables for fixed wiring; Amendment 1
IEC 60227-3 Edition 2.1-1997 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 3: Non-sheathed cables for fixed wiring
IEC 60227-4 AMD 1-1997 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 4: Sheathed cables for fixed wiring; Amendment 1
IEC 60227-4 Edition 2.1-1997 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 4: Sheathed cables for fixed wiring
IEC 60227-4-1992 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V; part 4: sheathed cables for fixed wiring
IEC 60227-5 AMD 1-1997 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 5: Flexible cables (cords); Amendment 1
IEC 60227-5 AMD 2-2003 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 5: Flexible cables (cords); Amendment 2
IEC 60227-5 Edition 2.1-1998 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 5: Flexible cables (cords)
IEC 60227-5 Edition 2.2-2003 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 5: Flexible cables (cords)
IEC 60227-5-1997 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 5: Flexible cables (cords)
IEC 60227-6-2001 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 6: Lift cables and cables for flexible connections
IEC 60227-7 AMD 1-2003 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 7: Flexible cables screened and unscreened with two or more conductors; Amendment 1
IEC 60227-7 Edition 1.1-2003 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 7: Flexible cables screened and unscreened with two or more conductors
IEC 60227-7-1995 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 7: Flexible cables screened and unscreened with two or more conductors
IEC 60228-2004 Conductors of insulated cables
IEC 60229-1982 Tests on cable oversheaths which have a special protective function and are applied by extrusion
IEC 60230-1966 Impulse tests on cables and their accessories
IEC 60245-1-2003 Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 1: General requirements
IEC 60245-2 AMD 1-1997 Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 2: Test methods; Amendment 1
IEC 60245-2 AMD 2-1997 Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 2: Test methods; Amendment 2
IEC 60245-2 Edition 2.2-1998 Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 2: Test methods
IEC 60245-2-1994 Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 2: Test methods
IEC 60245-3 AMD 1-1997 Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 3: Heat resistant silicone insulated cables; Amendment 1
IEC 60245-3-1994 Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 3: Heat resistant silicone insulated cables
IEC 60245-4 AMD 1-1997 Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 4: Cords and flexible cables; Amendment 1
IEC 60245-4 AMD 2-2003 Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 4: Cords and flexible cables; Amendment 2
IEC 60245-4 Edition 2.2-2004 Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 4: Cords and flexible cables
IEC 60245-4-1994 Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 4: Cords and flexible cables
IEC 60245-5 AMD 1-2003 Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 5: Lift cables; Amendment 1
IEC 60245-5-1994 Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 5: Lift cables
IEC 60245-6 AMD 1-1997 Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 6: Arc welding electrode cables; Amendment 1
IEC 60245-6 AMD 2-2003 Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 6: Arc welding electrode cables; Amendment 2
IEC 60245-6-1994 Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 6: Arc welding electrode cables
IEC 60245-7 AMD 1-1997 Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 7: Heat resistant ethylene-vinyl acetate rubber insulated cables; Amendment 1
IEC 60245-7-1994 Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 7: Heat resistant ethylene-vinyl acetate rubber insulated cables
IEC 60245-8 AMD 1-2003 Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 8: Cords for applications requiring high flexibility; Amendment 1
IEC 60245-8 Edition 1.1-2004 Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 8: Cords for applications requiring high flexibility
IEC 60245-8-1998 Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 8: Cords for applications requiring high flexibility
IEC 60287-1-1 AMD 1-1995 Electric cables - Calculation of the current rating - Part 1: Current rating equations (100% load factor) and calculation of losses - Section 1: General; Amendment 1
IEC 60287-1-1 AMD 2-2001 Electric cables - Calculation of the current rating - Part 1-1: Current rating equations (100% load factor) and calculation of losses; General; Amendment 2
IEC 60287-1-1 Edition 1.2-2001 Electric cables - Calculation of the current rating - Part 1-1: Current rating equations (100% load factor) and calculation of losses; General
IEC 60287-1-1-1994 Electric cables - Calculation of the current rating - Part 1: Current rating equations (100% load factor) and calculation of losses; section 1: General
IEC 60287-1-2-1993 Electric cables; calculation of the current rating; part 1: current rating equations (100% load factor) and calculation of losses; section 2: sheath eddy current loss factors for two circuits in flat formation
IEC 60287-1-3-2002 Electric cables - Calculation of the current rating - Part 1-3: Current rating equations (100 % load factor) and calculation of losses; Current sharing between parallel single-core cables and calculation of circulating current losses
IEC 60287-2-1 AMD 1-2001 Electric cables - Calculation of the current rating - Part 2-1: Thermal resistance; Calculation of thermal resistance; Amendment 1
IEC 60287-2-1 AMD 2-2006 Electric cables - Calculation of the current rating - Part 2-1: Thermal resistance - Calculation of thermal resistance; Amendment 2
IEC 60287-2-1 Edition 1.2-2006 Electric cables - Calculation of the current rating - Part 2-1: Thermal resistance - Calculation of thermal resistance
IEC 60287-2-1-1994 Electric cables - Calculation of the current rating - Part 2: Thermal resistance; section 1: Calculation of thermal resistance
IEC 60287-2-2-1995 Electric cables - Calculation of the current rating - Part 2: Thermal resistance - Section 2: A method for calculating reduction factors for groups of cables in free air, protected from solar radiation
IEC 60287-3-1 AMD 1-1999 Electric cables - Calculation of the current rating - Part 3-1: Sections on operating conditions - Reference operating conditions and selection of cable type; Amendment 1
IEC 60287-3-1 Edition 1.1-1999 Electric cables - Calculation of the current rating - Part 3-1: Sections on operating conditions - Reference operating conditions and selection of cable type
IEC 60287-3-1-1995 Electric cables - Calculation of the current rating - Part 3: Sections on operating conditions - Section 1: Reference operating conditions and selection of cable type
IEC 60287-3-2 AMD 1-1996 Electric cables - Calculation of the current rating - Part 3: Sections on operating conditions - Section 2: Economic optimization of power cable size; Amendment 1
IEC 60287-3-2-1995 Electric cables - Calculation of the current rating - Part 3: Sections on operating conditions - Section 2: Economic optimization of power cable size
IEC 60304-1982 Standard colours for insulation for low-frequency cables and wires
IEC 60331-11-1999 Tests for electric cables under fire conditions - Circuit integrity - Part 11: Apparatus - Fire alone at a flame temperature of at least 750 °C
IEC 60331-12-2002 Tests for electric cables under fire conditions - Circuit integrity - Part 12: Apparatus; Fire with shock at a temperature of at least 830 °C
IEC 60331-21-1999 Tests for electric cables under fire conditions - Circuit integrity - Part 21: Procedures and requirements - Cables of rated voltage up to and including 0,6/1,0 kV
IEC 60331-23-1999 Tests for electric cables under fire conditions - Circuit integrity - Part 23: Procedures and requirements - Electric data cables
IEC 60331-25-1999 Tests for electric cables under fire conditions - Circuit integrity - Part 25: Procedures and requirements - Optical fibre cables
IEC 60331-31-2002 Tests for electric cables under fire conditions - Circuit integrity - Part 31: Procedures and requirements for fire with shock; Cables of rated voltage up to and including 0,6/1,0 kV
IEC 60332-1-1-2004 Tests on electric and optical fibre cables under fire conditions - Part 1-1: Test for vertical flame propagation for a single insulated wire or cable - Apparatus
IEC 60332-1-2-2004 Tests on electric and optical fibre cables under fire conditions - Part 1-2: Test for vertical flame propagation for a single insulated wire or cable - Procedure for 1 kW pre-mixed flame
IEC 60332-1-3-2004 Tests on electric and optical fibre cables under fire conditions - Part 1-3: Test for vertical flame propagation for a single insulated wire or cable - Procedure for determination of flaming droplets/particles
IEC 60332-2-1-2004 Tests on electric and optical fibre cables under fire conditions - Part 2-1: Test for vertical flame propagation for a single small insulated wire or cable - Apparatus
IEC 60332-2-2-2004 Tests on electric and optical fibre cables under fire conditions - Part 2-2: Test for vertical flame propagation for a single small insulated wire or cable - Procedure for diffusion flame
IEC 60332-3-10-2000 Tests on electric cables under fire conditions - Part 3-10: Test for vertical flame spread of vertically-mounted bunches wires or cables; Apparatus
IEC 60332-3-21-2000 Tests on electric cables under fire conditions - Part 3-21: Test for vertical flame spread of vertically-mounted bunched wires or cables; Category A F/R
IEC 60332-3-22-2000 Tests on electric cables under fire conditions - Part 3-22: Test for vertical flame spread of vertically-mounted bunched wires or cables; Category A
IEC 60332-3-23-2000 Tests on electric cables under fire conditions - Part 3-23: Test for vertical flame spread of vertically-mounted bunched wires or cables; Category B
IEC 60332-3-24-2000 Tests on electric cables under fire conditions - Part 3-24: Test for vertical flame spread of vertically-mounted bunched wires or cables; Category C
IEC 60332-3-25-2000 Tests on electric cables under fire conditions - Part 3-25: Test for vertical flame spread of vertically-mounted bunched wires or cables; Category D
IEC 60344 AMD 1-1985 Guide to the calculation of resistance of plain and coated copper conductors of low-frequency cables and wires
IEC 60344-1980 Guide to the calculation of resistance of plain and coated copper conductors of low-frequency cables and wires
IEC 60371-3-8 Corrigendum 1-1995 Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 8: Mica paper tapes for flame-resistant security cables
IEC 60371-3-8-1995 Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 8: Mica paper tapes for flame-resistant security cables
IEC 60439-5 Edition 1.1-1998 Low-voltage switchgear and controlgear assemblies - Part 5: Particular requirements for assemblies intended to be installed outdoors in public places - Cable distribution cabinets (CDCs) for power distribution in networks
IEC 60465-1988 Specification for unused insulating mineral oils for cables with oil ducts
IEC 60502-1-2004 Power cables with extruded insulation and their accessories for rated voltages from 1 kV (U<(Index)m> = 1,2 kV) up to 30 kV (U<(Index)m> = 36 kV) - Part 1: Cables for rated voltages of 1 kV (U<(Index)m> = 1,2 kV) and 3 kV (U<(Index)m> = 3,6 kV)
IEC 60502-2-2005 Power cables with extruded insulation and their accessories for rated voltages from 1 kV (U<(Index)m> = 1,2 kV) up to 30 kV (U<(Index)m> = 36 kV) - Part 2: Cables for rated voltages from 6 kV (U<(Index)m> = 7,2 kV) up to 30 kV (U<(Index)m> = 36 kV)
IEC 60502-4-2005 Power cables with extruded insulation and their accessories for rated voltages from 1 kV (U<(Index)m> = 1,2 kV) up to 30 kV (U<(Index)m> = 36 kV) - Part 4: Test requirements on accessories for cables with rated voltages from 6 kV (U<(Index)m> = 7,2 kV) up to 30 kV (U<(Index)m> = 36 kV)
IEC 60526-1978 High-voltage cable plug and socket connections for medical X-ray equipment
IEC 60584-3-1989 Thermocouples; part 3: extension and compensating cables; tolerances and identification system
IEC 60603-9-1990 Connectors for frequencies below 3 MHz for use with printed boards; part 9: two-part connectors for printed boards, backpanels and cable connectors, basic grid of 2,54 mm (0,1 in)
IEC 60702-1-2002 Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 1: Cables
IEC 60702-2-2002 Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 2: Terminations
IEC 60708-2005 Low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath
IEC 60719-1992 Calculation of the lower and upper limits for the average outer dimensions of cables with circular copper conductors and of rated voltages up to and including 450/750 V
IEC 60724-2000 Short-circuit temperature limits of electric cables with a rated voltage of 1 kV (U<(Index)m> = 1,2 kV) and 3 kV (U<(Index)m> = 3,6 kV)
IEC 60728-1-2001 Cabled distribution systems for television and sound signals - Part 1: Methods of measurement and system performance
IEC 60728-10-2005 Cable networks for television signals, sound signals and interactive services - Part 10: System performance of return path
IEC 60728-11-2005 Cable networks for television signals, sound signals and interactive services - Part 11: Safety
IEC 60728-12-2001 Cabled distribution systems for television and sound signals - Part 12: Electromagnetic compatibility of systems
IEC 60728-2-2002 Cabled distribution systems for television and sound signals - Part 2: Electromagnetic compatibility for equipment
IEC 60728-3-2005 Cable networks for television signals, sound signals and interactive services - Part 3: Active wideband equipment for coaxial cable network
IEC 60728-4-2000 Cabled distribution systems for television and sound signals - Part 4: Passive coaxial wideband distribution equipment
IEC 60728-5-2001 Cabled distribution systems for television and sound signals - Part 5: Headend equipment
IEC 60728-6-2003 Cable networks for television signals, sound signals and interactive services - Part 6: Optical equipment
IEC 60728-7-1-2003 Cable networks for television signals, sound signals and interactive services - Part 7-1: Hybrid Fibre Coax Outside Plant Status Monitoring; Physical (PHY) layer specification
IEC 60728-7-2-2003 Cable networks for television signals, sound signals and interactive services - Part 7-2: Hybrid Fibre Coax Outside Plant Status Monitoring; Media access control (MAC) layer specification
IEC 60728-7-3-2003 Cable networks for television signals, sound signals and interactive services - Part 7-3: Hybrid Fibre Coax Outside Plant Status Monitoring; Power supply to transponder interface bus (PSTIB) specification
IEC 60728-9 AMD 1-2005 Cabled distribution systems for television and sound signals - Part 9: Interfaces of cabled distribution systems for digitally modulated signals; Amendment 1
IEC 60728-9-2000 Cabled distribution systems for television and sound signals - Part 9: Interfaces of cabled distribution systems for digitally modulated signals
IEC 60754-1-1994 Test on gases evolved during combustion of materials from cables; part 1: determination of the amount of halogen acid gas
IEC 60754-2 AMD 1-1997 Test on gases evolved during combustion of electric cables - Part 2: Determination of degree of acidity of gases evolved during the combustion of materials taken from electric cables by measuring pH and conductivity; Amendment 1
IEC 60754-2-1991 Test on gases evolved during combustion of electric cables; part 2: determination of degree of acidity of gases evolved during the combustion of materials taken from electric cables by measuring pH and conductivity
IEC 60794-1-2-2003 Optical fibre cables - Part 1-2: Generic specification; Basic optical cable test procedures
IEC 60794-2-10-2003 Optical fibre cables - Part 2-10: Indoor optical fibre cables; Family specification for simplex and duplex cables
IEC 60794-2-11-2005 Optical fibre cables - Part 2-11: Indoor cables - Detailed specification for simplex and duplex cables for use in premises cabling
IEC 60794-2-20-2003 Optical fibre cables - Part 2-20: Indoor cables; Family specification for multi-fibre optical distribution cables
IEC 60794-2-21-2005 Optical fibre cables - Part 2-21: Indoor cables - Detailed specification for multi-fibre optical distribution cables for use in premises cabling
IEC 60794-2-30-2003 Optical fibre cables - Part 2-30: Indoor optical fibrea cables; Family specification for optical fibre ribbon cables
IEC 60794-2-31-2005 Optical fibre cables - Part 2-31: Indoor cables - Detailed specification for optical fibre ribbon cables for use in premises cabling
IEC 60794-2-40 Corrigendum 1-2005 Corrigendum 1 - Optical fibre cables - Part 2-40: Indoor cables - Family specification for simplex and duplex cables with buffered A4 fibres
IEC 60794-3-10-2002 Optical fibre cables - Part 3-10: Outdoor cables; Family specification for duct and directly buried optical telecommunication cables
IEC 60794-3-12-2005 Optical fibre cables - Part 3-12: Outdoor cables - Detailed specification for duct and directly buried optical telecommunication cables for use in premises cabling
IEC 60794-3-20-2002 Optical fibre cables - Part 3-20: Outdoor cables; Family specification for optical self-supporting aerial telecommunication cables
IEC 60794-3-2001 Optical fibre cables - Part 3: Sectional specification; Outdoor cables
IEC 60794-3-21-2005 Optical fibre cables - Part 3-21: Outdoor cables - Detailed specification for optical self-supporting aerial telecommunication cables for use in premises cabling
IEC 60800-1992 Heating cables with a rated voltage of 300/500 V for comfort heating and prevention of ice formation
IEC 60803 AMD 1-1995 Recommended dimensions for hexagonal and square crimping-die cavities, indentors, gauges, outer conductor crimp sleeves and centre contact crimp barrels for r.f. cables and connectors; Amendment 1
IEC 60803-1984 Recommended dimensions for hexagonal and square crimping-die cavities, indentors, gauges, outer conductor crimp sleeves and centre contact crimp barrels for r.f. cables and connectors
IEC 60807-8-1992 Rectangular connectors for frequencies below 3 MHz; part 8: detail specification for connectors, four-signal contacts and earthing contacts for cable screen
IEC 60811-1-1 AMD 1-2001 Common test methods for insulating and sheathing materials of electric and optical cables - Part 1-1: Methods for general application; Measurement of thickness and overall dimensions; Tests for determining the mechanical properties; Amendment 1
IEC 60811-1-1 Edition 2.1-2001 Common test methods for insulating and sheathing materials of electric cables and optical cables - Part 1-1: Methods for general application; Measurement of thickness and overall dimensions; Tests for determining the mechanical properties
IEC 60811-1-1-1993 Common test methods for insulating and sheathing materials of electric cables; part 1: methods for general application; section 1: measurement of thickness and overall dimensions; tests for determining the mechanical properties
IEC 60811-1-2 AMD 1-1989 Common test methods for insulating and sheathing materials of electric cables; part 1: methods for general application; section two: thermal ageing methods; amendment No. 1 to IEC 60811-1-2:1985
IEC 60811-1-2 AMD 2-2000 Common tests methods for insulating and sheathing materials of electric and optical cables - Part 1-2: Methods for general application; Thermal ageing methods; Amendment 2
IEC 60811-1-2 Corrigendum 1-1986 Common test methods for insulating and sheathing materials of electric cables - Part 1: Methods for general application - Section 2: Thermal ageing methods; Corrigendum 1
IEC 60811-1-2-1985 Common test methods for insulating and sheathing materials of electric cables; part 1: methods for general application; section two: thermal ageing methods
IEC 60811-1-3 AMD 1-2001 Common test methods for insulating and sheathing materials of electric and optical cables - Part 1-3: General application - Methods for determining the density; Water absorption tests; Shrinkage test; Amendment 1
IEC 60811-1-3 Edition 2.1-2001 Common test methods for insulating and sheathing materials of electric and optical cables - Part 1-3: General application; Methods for determining the density; Water absorption tests; Shrinkage test
IEC 60811-1-3-1993 Insulating and sheathing materials of electric cables; common test methods; part 1: general application; section 3: methods for determining the density; water absorption tests; shrinkage test
IEC 60811-1-4 AMD 1-1993 Common test methods for insulating and sheathing materials of electric cables; part 1: methods for general application; section 4: test at low temperature; amendment 1
IEC 60811-1-4 AMD 2-2001 Common test methods for insulating and sheathing materials of electric and optical cables - Part 1-4: Methods for general application; Test at low temperature; Amendment 2
IEC 60811-1-4 Corrigendum 1-1986 Common test methods for insulating and sheathing materials of electric cables - Part 1 : Methods for general application - Section 4: Tests at low temperature; Corrigendum 1
IEC 60811-1-4-1985 Common test methods for insulating and sheathing materials of electric cables. Part 1 : Methods for general application. Section Four - Tests at low temperature
IEC 60811-2-1 AMD 1-2001 Common test methods for insulating and sheathing materials of electric and optical cables - Part 2-1: Methods specific to elastomeric compounds; Ozone resistance, hot set and mineral oil immersion tests; Amendment 1
IEC 60811-2-1 Edition 2.1-2001 Common test methods for insulating and sheathing materials of electric and optical cables - Part 2-1: Methods specific to elastomeric compounds; Ozone resistance, hot set and mineral oil immersion tests
IEC 60811-2-1-1998 Insulating and sheathing materials of electric and optical cables - Common test methods - Part 2-1: Methods specific to elastomeric compounds - Ozone resistance, hot set and mineral oil immersion tests
IEC 60811-3-1 AMD 1-1994 Common test methods for insulating and sheathing materials of electric cables - Part 3: Methods specific to PVC compounds - Section 1: Pressure test at high temperature - Tests for resistance to cracking; Amendment 1
IEC 60811-3-1 AMD 2-2001 Common test methods for insulating and sheathing materials of electric and optical cables - Part 3-1: Methods specific to PVC compounds - Pressure test at high temperature; Tests for resistance to cracking; Amendment 2
IEC 60811-3-1 Corrigendum 1-1986 Common test methods for insulating and sheathing materials of electric cables - Part 3 : Methods specific to PVC compounds - Section 1: Pressure test at high temperature - Tests for resistance to cracking; Corrigendum 1
IEC 60811-3-1-1985 Common test methods for insulating and sheathing materials of electric cables. Part 3 : Methods specific to PVC compounds. Section One : Pressure test at high temperature - Tests for resistance to cracking
IEC 60811-3-2 AMD 1-1993 Common test methods for insulating and sheathing materials of electric cables; part 3: methods specific to PVC compounds; section 2: loss of mass test; thermal stability test; amendment 1
IEC 60811-3-2 AMD 2-2003 Insulating and sheathing materials of electric and optical cables - Common test methods - Part 3-2: Methods specific to PVC compounds - Loss of mass test - Thermal stability test; Amendment 2
IEC 60811-3-2 Corrigendum 1-1986 Common test methods for insulating and sheathing materials of electric cables - Part 3 : Methods specific to PVC compounds - Section 2: Loss of mass test - Thermal stability test; Corrigendum 1
IEC 60811-3-2-1985 Common test methods for insulating and sheathing materials of electric cables. Part 3 : Methods specific to PVC compounds. Section Two : Loss of mass test - Thermal stability test
IEC 60811-4-1-2004 Insulating and sheathing materials of electric and optical cables - Common test methods - Part 4-1: Methods specific to polyethylene and polypropylene compounds - Resistance to environmental stress cracking - Measurement of the melt flow index - Carbon black and/or mineral filler content measurement in polyethylene by direct combustion - Measurement of carbon black content by thermogravimetric analysis (TGA) - Assessment of carbon black dispersion in polyethylene using a microscope
IEC 60811-4-2-2004 Insulating and sheathing materials of electric and optical fibre cables - Common test methods - Part 4-2: Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at break after conditioning at elevated temperature - Wrapping test after conditioning at elevated temperature - Wrapping test after thermal ageing in air - Measurement of mass increase - Long-term stability test - Test method for copper-catalysed oxidative degradation
IEC 60811-5-1 AMD 1-2003 Insulating and sheathing materials of electric and optical cables - Common test methods - Part 5-1: Methods specific to filling compounds - Drop point - Separation of oil - Lower temperature brittleness - Total acid number - Absence of corrosive components - Permittivity at 23 °C - DC resistivity at 23 °C and 100 °C; Amendment 1
IEC 60811-5-1 Edition 1.1-2004 Insulating and sheathing materials of electric and optical cables - Common test methods - Part 5-1: Methods specific to filling compounds - Drop-point - Separation of oil - Lower temperature brittleness - Total acid number - Absence of corrosive components - Permittivity at 23 °C - DC resistivity at 23 °C and 100 °C
IEC 60811-5-1-1990 Common test methods for insulating and sheathing materials of electric cables; part 5: methods specific to filling compounds; section one: drop point; separation of oil; lower temperature brittleness; total acid number; absence of corrosive components; permittivity at 23 °C; d.c. resistivity at 23 °C and 100 °C
IEC 60840-2004 Power cables with extruded insulation and their accessories for rated voltages above 30 kV (U<(Index)m> = 36 kV) up to 150 kV (U<(Index)m> = 170 kV) - Test methods and requirements
IEC 60853-1 AMD 1-1994 Calculation of the cyclic and emergency current rating of cables - Part 1: Cyclic rating factor for cables up to and including 18/30(36) kV; Amendment 1
IEC 60853-1-1985 Calculation of the cyclic and emergency current rating of cables. Part 1 : Cyclic rating factor for cables up to and including 18/30 (36) kV
IEC 60853-2-1989 Calculation of the cyclic and emergency current rating of cables; part 2: cyclic rating of cables greater than 18/30 (36) kV and emergency ratings for cables of all voltages
IEC 60853-3-2002 Calculation of the cyclic and emergency current rating of cables - Part 3: Cyclic rating factor for cables of all voltages, with partial drying of the soil
IEC 60885-1-1987 Electrical test methods for electric cables. Part 1 : Electrical tests for cables, cords and wires for voltages up to and including 450/750 V
IEC 60885-2-1987 Electrical test methods for electric cables. Part 2 : Partial discharge tests
IEC 60885-3-1988 Electrical test methods for electric cables; part 3: test methods for partial discharge measurements on lengths of extruded power cable
IEC 60918 AMD 1-1992 PVC insulated ribbon cable with a pitch of 1,27 mm suitable for insulation displacement termination; amendment 1 to IEC 60918:1987
IEC 60918-1987 PVC insulated ribbon cable with a pitch of 1.27 mm suitable for insulation displacement termination.
IEC 60966-1-1999 Radio frequency and coaxial cable assemblies - Part 1: Generic specification - General requirements and test methods
IEC 60966-2-1-2003 Radio frequency and coaxial cable assemblies - Part 2-1: Sectional specification for flexible coaxial cable assemblies
IEC 60966-2-2-2003 Radio frequency and coaxial cable assemblies - Part 2-2: Blank detail specification for flexible coaxial cable assemblies
IEC 60966-2-3-2003 Radio frequency and coaxial cable assemblies - Part 2-3: Detail specification for flexible coaxial cable assemblies
IEC 60966-2-4-2003 Radio frequency and coaxial cable assemblies - Part 2-4: Detail specification for cable assemblies for radio and TV receivers; Frequency range 0 to 3 000 MHz, IEC 61169-2 connectors
IEC 60966-2-5-2003 Radio frequency and coaxial cable assemblies - Part 2-5: Detail specification for cable assemblies for radio and TV receivers; Frequency range 0 to 1 000 MHz, IEC 61169-2 connectors
IEC 60966-2-6-2003 Radio frequency and coaxial cable assemblies - Part 2-6: Detail specification for cable assemblies for radio and TV receivers; Frequency range 0 to 3000 MHz, IEC 61169-24 connectors
IEC 60966-3-1-2003 Radio frequency and coaxial cable assemblies - Part 3-1: Blank detail specification for semi-flexible coaxial cable assemblies
IEC 60966-3-2-2003 Radio frequency and coaxial cable assemblies - Part 3-2: Detail specification for semi-flexible coaxial cable assemblies for GSM use (0,8 GHz - 1 GHz)
IEC 60966-3-2003 Radio frequency and coaxial cable assemblies - Part 3: Sectional specification for semi-flexible coaxial cable assemblies
IEC 60966-4-1-2003 Radio frequency and coaxial cable assemblies - Part 4-1: Blank detail specification for semi-rigid coaxial cable assemblies
IEC 60966-4-2003 Radio frequency and coaxial cable assemblies - Part 4: Sectional specification for semi-rigid coaxial cable assemblies
IEC 60974-12-2005 Arc-welding equipment - Part 12: Coupling devices for welding cables
IEC 60986-2000 Short-circuit temperature limits of electric cables with rated voltages from 6 kV (U<(Index)m> = 7,2 kV) up to 30 kV (U<(Index)m> = 36 kV)
IEC 61034-1-2005 Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus
IEC 61034-2-2005 Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements
IEC 61076-4-108-2002 Connectors for electronic equipment - Part 4-108: Printed board connectors with assessed quality; Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density of 15 mm, having a basic grid of 2,5 mm in accordance with IEC 60917-1
IEC 61076-4-110-2001 Connectors for electronic equipment - Part 4-110: Printed board connectors with assessed quality; Detail specification for latched cable connector system having a basic grid of 2,0 mm including full shielding and latching function
IEC 61076-7-001-2004 Connectors for electronic equipment - Part 7-001: Cable outlet accessories - Blank detail specification
IEC 61076-7-100-2006 Connectors for electronic equipment - Part 7-100: Cable outlet accessories - Detail specification for a metric cable sealing consisting of an integrated part of heavy-duty rectangular or circular connector hoods and a sealing system
IEC 61076-7-2000 Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 7: Cable outlet accessories with assessed quality, including qualification and capability approval - Sectional specification
IEC 61084-1 AMD 1-1993 Cable trunking and ducting systems for electrical installations; part 1: general requirements; amendment 1
IEC 61084-1-1991 Cable trunking and ducting systems for electrical installations; part 1: general requirements
IEC 61084-2-1-1996 Cable trunking and ducting systems for electrical installations - Part 2: Particular requirements - Section 1: Cable trunking and ducting systems intended for mounting on walls or ceilings
IEC 61084-2-2-2003 Cable trunking and ducting systems for electrical installations - Part 2-2: Particular requirements; Cable trunking systems and cable ducting systems intended for underfloor and flushfloor installations
IEC 61084-2-4-1996 Cable trunking and ducting systems for electrical installations - Part 2: Particular requirements - Section 4: Service poles
IEC 61138 AMD 1-1995 Cables for portable earthing and short-circuiting equipment; Amendment 1
IEC 61138-1994 Cables for portable earthing and short-circuiting equipment
IEC 61156-1 Corrigendum 1-2005 Corrigendum 1 - Multicore and symmetrical pair/quad cables for digital communications - Part 1: Generic specification
IEC 61156-1-1-2001 Multicore and symmetrical pair/quad cables for digital communications - Part 1-1: Capability approval; Generic specification
IEC 61156-1-2002 Multicore and symmetrical pair/quad cables for digital communication - Part 1: Generic specification
IEC 61156-2-1-2003 Multicore and symmetrical pair/quad cables for digital communications - Part 2-1: Horizontal floor wiring; Blank detail specification
IEC 61156-2-2-2001 Multicore and symmetrical pair/quad cables for digital communications - Part 2-2: Horizontal floor wiring; Capability approval; Sectional specification
IEC 61156-2-2003 Multicore and symmetrical pair/quad cables for digital communications - Part 2: Horizontal floor wiring; Sectional specification
IEC 61156-3-1-2003 Multicore and symmetrical pair/quad cables for digital communications - Part 3-1: Work area wiring; Blank detail specification
IEC 61156-3-2-2001 Multicore and symmetrical pair/quad cables for digital communications - Part 3-2: Work area wiring; Capability approval; Sectional specification
IEC 61156-3-2003 Multicore and symmetrical pair/quad cables for digital communications - Part 3: Work area wiring; Sectional specification
IEC 61156-4-1-2003 Multicore and symmetrical pair/quad cables for digital communications - Part 4-1: Riser cables; Blank detail specification
IEC 61156-4-2-2001 Multicore and symmetrical pair/quad cables for digital communications - Part 4-2: Riser cables; Capability approval; Sectional specification
IEC 61156-4-2003 Multicore and symmetrical pair/quad cables for digital communications - Part 4: Riser cables; Sectional specification
IEC 61156-5-1-2002 Multicore and symmetrical pair/quad cables for digital communications - Part 5-1: Symmetrical pair/quad cables with transmission characteristics up to 600 MHz; Horizontal floor wiring; Blank detail specification
IEC 61156-5-2-2002 Multicore and symmetrical pair/quad cables for digital communications - Part 5-2: Symmetrical pair/quad cables with transmission characteristics up to 600 MHz; Horizontal floor wiring; Capability approval; Sectional specification
IEC 61156-5-2002 Multicore and symmetrical pair/quad cables for digital communications - Part 5: Symmetrical pair/quad cables with transmission characteristics up to 600 MHz; Horizontal floor wiring; Sectional specification
IEC 61156-6-1-2002 Multicore and symmetrical pair/quad cables for digital communications - Part 6-1: Symmetrical pair/quad cables with transmission characteristics up to 600 MHz; Work area wiring; Blank detail specification
IEC 61156-6-2-2002 Multicore and symmetrical pair/quad cables for digital communications - Part 6-2: Symmetrical pair/quad cables with transmission characteristics up to 600 MHz; Work area wiring; Capability approval; Sectional specification
IEC 61156-6-2002 Multicore and symmetrical pair/quad cables for digital communications - Part 6: Symmetrical pair/quad cables with transmission characteristics up to 600 MHz; Work area wiring; Sectional specification
IEC 61156-7-1-2003 Multicore and symmetrical pair/quad cables for digital communications - Part 7-1: Symmetrical pair cables with transmission characteristics up to 1200 MHz; Blank detail specification for digital and analog communication cables
IEC 61156-7-2-2003 Multicore and symmetrical pair/quad cables for digital communications - Part 7-2: Symmetrical pair cables with transmission characteristics up to 1200 MHz; Quality assessment procedure; Sectional specification for digital and analog communication cables
IEC 61156-7-2003 Multicore and symmetrical pair/quad cables for digital communications - Part 7: Symmetrical pair cables with transmission characteristics up to 1200 MHz; Sectional specification for digital and analog communication cables
IEC 61169-24-2001 Radio-frequency connectors - Part 24: Sectional specification; Radio frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable distribution systems (type F)
IEC 61196-1-100-2005 Coaxial communication cables - Part 1-100: Electrical test methods - General requirements
IEC 61196-1-101-2005 Coaxial communication cables - Part 1-101: Electrical test methods - Test for conductor d.c. resistance of cable
IEC 61196-1-102-2005 Coaxial communication cables - Part 1-102: Electrical test methods - Test for insulation resistance of cable dielectric
IEC 61196-1-103-2005 Coaxial communication cables - Part 1-103: Electrical test methods - Test for capacitance of cable
IEC 61196-1-104-2005 Coaxial communication cables - Part 1-104: Electrical test methods - Test for capacitance stability of cable
IEC 61196-1-105-2005 Coaxial communication cables - Part 1-105: Electrical test methods - Test for withstand voltage of cable dielectric
IEC 61196-1-107-2005 Coaxial communication cables - Part 1-107: Electrical test methods - Test for cable microphony charge level (mechanically induced noise)
IEC 61196-1-108-2005 Coaxial communication cables - Part 1-108: Electrical test methods - Test for characteristic impedance, phase and group delay, electrical length and propagation velocity
IEC 61196-1-111-2005 Coaxial communication cables - Part 1-111: Electrical test methods - Test for stability of phase constant
IEC 61196-1-112-2006 Coaxial communication cables - Part 1-112: Electrical test methods - Test for return loss (uniformity of impedance)
IEC 61196-1-115-2006 Coaxial communication cables - Part 1-115: Electrical test methods - Test for regularity of impedance (pulse/step function return loss)
IEC 61196-1-122-2006 Coaxial communication cables - Part 1-122: Electrical test methods - Test for cross-talk between coaxial cables
IEC 61196-1-200-2005 Coaxial communication cables - Part 1-200: Environmental test methods - General requirements
IEC 61196-1-2005 Coaxial communication cables - Part 1: Generic specification - General, definitions and requirements
IEC 61196-1-206-2005 Coaxial communication cables - Part 1-206: Environmental test methods - Climatic sequence
IEC 61196-1-301-2005 Coaxial communication cables - Part 1-301: Mechanical test methods - Test for ovality
IEC 61196-1-302-2005 Coaxial communication cables - Part 1-302: Mechanical test methods - Test for eccentricity
IEC 61196-1-308-2005 Coaxial communication cables - Part 1-308: Mechanical test methods - Test for tensile strength and elongation for copper-clad metals
IEC 61196-1-310-2005 Coaxial communication cables - Part 1-310: Mechanical test methods - Test for torsion characteristics of copper-clad metals
IEC 61196-1-314-2006 Coaxial communication cables - Part 1-314: Mechanical test methods - Test for bending
IEC 61196-1-316-2005 Coaxial communication cables - Part 1-316: Mechanical test methods - Test for maximum pulling force of cable
IEC 61196-1-317-2006 Coaxial communication cables - Part 1-317: Mechanical test methods - Test for crush resistance of cable
IEC 61196-1-324-2006 Coaxial communication cables - Part 1-324: Mechanical test methods - Test for abrasion resistance of cable
IEC 61196-2-1995 Radio-frequency cables - Part 2: Sectional specification for semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene (PTFE) insulation
IEC 61196-3-1-1995 Radio-frequency cables - Part 3: Coaxial cables for digital communication in horizontal floor wiring - Section 1: Detail specification for cables of 500 m reach and up to 10 Mb/s
IEC 61196-3-1998 Radio-frequency cables - Part 3: Sectional specification for coaxial cables for local area networks
IEC 61196-3-2-1997 Radio-frequency cables - Part 3-2: Coaxial cables for digital communication in horizontal floor wiring - Detail specification for coaxial cables with solid dielectric for local area networks of 185 m reach and up to 10 Mb/s
IEC 61196-3-3-1997 Radio-frequency cables - Part 3-3: Coaxial cables for digital communication in horizontal floor wiring - Detail specification for coaxial cables with foamed dielectric for local area networks of 185 m reach and up to 10 Mb/s
IEC 61196-4-2004 Coaxial communication cables - Part 4: Sectional specification for radiating cables
IEC 61238-1-2003 Compression and mechanical connectors for power cables for rated voltages up to 30 kV (U<(Index)m>=36 kV) - Part 1: Test methods and requirements
IEC 61316-1999 Industrial cable reels
IEC 61386-21-2002 Conduit systems for cable management - Part 21: Particular requirements; Rigid conduit systems
IEC 61386-22-2002 Conduit systems for cable management - Part 22: Particular requirements; Pliable conduit systems
IEC 61386-23-2002 Conduit systems for cable management - Part 23: Particular requirements; Flexible conduit systems
IEC 61386-24-2004 Conduit systems for cable management - Part 24: Particular requirements - Conduit systems buried underground
IEC 61442-2005 Test methods for accessories for power cables with rated voltages from 6 kV (U<(Index)m> = 7,2 kV) up to 30 kV (U<(Index)m> = 36 kV)
IEC 61443-1999 Short-circuit temperature limits of electric cables with rated voltages above 30 kV (U<(Index)m> = 36 kV)
IEC 61515-1995 Mineral insulated thermocouple cables and thermocouples
IEC 61537-2001 Cable tray systems and cable ladder systems for cable management
IEC 61935-1 Edition 1.1-2002 Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 - Part 1: Installed cabling
IEC 61935-1-2005 Testing of balanced communication cabling in accordance with ISO/IEC 11801 - Part 1: Installed cabling
IEC 61950-1997 Cable management systems - Specification for conduit fittings for electrical installations for extra-heavy duty metal conduit
IEC 62012-1-2004 Multicore and symmetrical pair/quad cables for digital communications to be used in harsh environments - Part 1: Generic specification
IEC 62037-1999 RF connectors, connector cable assemblies and cables - Intermodulation level measurement
IEC 62067 Edition 1.1-2006 Power cables with extruded insulation and their accessories for rated voltages above 150 kV (U<(Index)m> = 170 kV) up to 500 kV (U<(Index)m> = 550 kV) - Test methods and requirements
IEC 62067-2001 Power cables with extruded insulation and their accessories for rated voltages above 150 kV (U<(Index)m> = 170 kV) up to 500 kV (U<(Index)m> = 550 kV) - Test methods and requirements
IEC 62153-1-1-2003 Metallic communication cables test methods - Part 1-1: Electrical; Measurement of the pulse/step return loss in the frequency domain using the Inverse Discrete Fourier Transformation (IDFT)
IEC 62153-4-2-2003 Metallic communication cables test methods - Part 4-2: Electromagnetic compatibility (EMC); Screening and coupling attenuation; Injection clamp method
IEC 62153-4-3-2006 Metallic communication cable test methods - Part 4-3: Electromagnetic compatibility (EMC) - Surface transfer impedance - Triaxial method
IEC 62153-4-4-2006 IEC 62153-4-4: Metallic communication cable test methods - Part 4-4: Electromagnetic Compatibility (EMC) - Shielded screening attenuation, test method for measuring of the screening attenuation a<(Index)s> up to and above 3 GHz
IEC 62153-4-5-2006 Metallic communication cable test methods - Part 4-5: Electromagnetic compatibility (EMC) - Coupling or screening attenuation - Absorbing clamp method
IEC 62153-4-6-2006 Metallic communication cable test methods - Part 4-6: Electro Magnetic Compatibility (EMC) - Surface transfer impedance - Line injection method
IEC 62153-4-7-2006 Metallic communication cable test methods - Part 4-7: Electromagnetic compatibility (EMC) - Test method for measuring the transfer impedance and the screening - or the coupling attenuation - Tube in tube method
IEC 62230-2006 Electric cables - Spark-test method
IEC 62255-2-1-2006 Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 2-1: Unfilled cables - Blank detail specification
IEC 62255-2-2006 Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 2: Unfilled cables - Sectional specification
IEC 62255-3-1-2006 Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 3-1: Filled cables - Blank detail specification
IEC 62255-3-2006 Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 3: Filled cables - Sectional specification
IEC 62255-4-1-2006 Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 4-1: Aerial drop cables - Blank detail specification
IEC 62255-4-2006 Multicore and symmetrical pair/quad cables for broadband digital communications (High bit rate digital access telecommunication networks) - Outside plant cables - Part 4: Aerial drop cables - Sectional specification
IEC 62255-5-1-2006 Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 5-1: Filled drop cables - Blank detail specification
IEC 62255-5-2006 Multicore and symmetrical pair/quad cables for broadband digital communications (High bit rate digital access telecommunication networks) - Outside plant cables - Part 5: Filled drop cables - Sectional specification
IEC/PAS 60794-2-50-2004 Optical fibre cables - Part 2-50: Indoor optical fibre cables - Family specification for simplex and duplex cables for use in patch cords
IEC/PAS 61076-3-109-2001 Connectors for electronic equipment - Part 3-109: Detail specification for two-part cable to board connector for high speed data application in a harsh industrial environment; Protection rate IP67 according to IEC 60529
IEC/PAS 62338-2002 Screened balanced cables - Coupling attenuation measurement, triaxial method
IEC/TR 60649-1979 Calculation of maximum external diameter of cables for indoor installations
IEC/TR 61901-2005 Development tests recommended on cables with a longitudinally applied metal foil for rated voltages above 30 kV (U<(Index)m> = 36 kV)
IEC/TR 62064-1999 Radio-frequency cables - Relationship between surface transfer impedance and screening attenuation (A background to the recommended limits contained in IEC 61196-1, clause 14)
IEC/TR 62095-2003 Electric cables - Calculations for the current ratings - Cable current rating using the finite elements method
IEC/TR 62222-2006 Fire performance of communication cables installed in buildings
IEC/TR2 61423-1-1995 Heating cables for industrial applications - Part 1: Performance requirements and test methods; Technical Report Type 2
IEC/TR2 61423-2-1995 Heating cables for industrial applications - Part 2: Constructional and material requirements; Technical Report Type 2
IEC/TR3 61000-5-2-1997 Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 2: Earthing and cabling
IEC/TR3 61917-1998 Cables, cable assemblies and connectors - Introduction to electromagnetic (EMC) screening measurements
IEC/TS 60859 Corrigendum 1-2000 Cable connections for gas-insulated metal-enclosed switchgear for rated voltages of 72,5 kV and above - Fluid-filled and extruded insulation cables - Fluid-filled and dry type cable-terminations
IEC/TS 60859 Corrigendum 2-2000 Cable connections for gas-insulated metal-enclosed switchgear for rated voltages of 72,5 kV and above - Fluid-filled and extruded insulation cables - Fluid-filled and dry type cable-terminations
IEC/TS 60859-1999 Cable connections for gas-insulated metal-enclosed switchgear for rated voltages of 72,5 kV and above - Fluid-filled and extruded insulation cables - Fluid-filled and dry type cable-terminations
IEC/TS 61244-3-2005 Long-term radiation ageing in polymers - Part 3: Procedures for in-service monitoring of low-voltage cable materials
IEC/TS 61873-2001 State of the art for symmetrical pair/quad cables with transmission characteristics beyond category 5
IEC/TS 62100-2004 Cables for aeronautical ground lighting primary circuits
Contact Us

Add the link of current page.

Clear

Submit

Instant Messaging

WhatsApp :

+852 6230 0392

Skype :

Caledonian Cables

live:1cb87739a29fb08c

Wechat :
The personal information you enter is only used to reply to your message, It will not be leaked or used for other purposes.